TASK 27-48-03-404-005
3. Nose Gear Pressure Switch Installation (Fig. 401)______________________________________
A. Special Tools and Equipment
(1)
F70200-14 - Strut Inflation Tool OR
(2)
3MIT65B00163-1 - Landing Gear Strut Service Manifold Assembly
B.
Standard Tools and Equipment
(1)
Clean, dry air or nitrogen bottle capable of pressurizing shock strut to 1800 psi
C.
Consumable Materials
(1)
A00226 Compound - Sealing, BMS 8-45 (Tamper-Proof Putty)
(2)
D00070 Oil - Hydraulic, Petroleum Base - MIL-H-5606
D.
References
(1)
AMM 12-15-05/301, Nose Landing Gear Shock Strut
(2)
AMM 32-00-30/201, Landing Gear Door Locks
(3)
IPC 32-21-01 Fig. 4
(4)
SSM 31-51-13
(5)
WDM 31-51-11
E.
Access
(1)
Location Zone
114 Nose Gear Wheel Well, RH
F.
Procedure
(1)
Put the O-ring and the back-up rings fully into the hydraulic fluid.
S 424-007
(2)
Install the pressure switch in the manifold.
(a)
Install a lockwire on the switch.
S 644-006
S 484-015
(3) Do this task: "Nose Gear Pressure Switch Functional Test", (AMM 27-48-03/501).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-48-03
ALL ú ú 02 Page 403 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(4) S 094-016Remove the rig pin.
(5) S 864-010Turn the shutoff valve handle counterclockwise to the fully open position.
(6) S 794-011Make sure that there are no leaks around the switch.
(7) S 614-015Inflate the shock strut if it is necessary (AMM 12-15-05/301).
(8) S 084-016Remove the strut inflation tool or the manifold assembly and the source of air or nitrogen.
S 094-012
WARNING: USE THE PROCEDURE IN AMM 32-00-30/201 TO REMOVE THE DOOR LOCKS
_______ FROM THE NOSE GEAR. THE DOORS OPEN AND CLOSE QUICKLY AND CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(9) Do this task: "Removal of the Door Locks from the Nose Landing Gear" (AMM 32-00-30/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-48-03
ALL ú ú 02 Page 404 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
NOSE GEAR PRESSURE SWITCH - ADJUSTMENT/TEST
___________________________________________
1. General_______
A. There are two tasks in this procedure. The first task locks out the nose landing gear and doors while working in the NLG area and then performs the functional test of the nose gear pressure switch (which is referred to as the "pressure switch"). The second task has the pressure proof test of the nose gear pressure switch assembly. The procedure has these parts:
(1)
The installation of the ground locks on the landing gear and the door locks on the nose gear.
(2)
The functional testing of the pressure switch.
(3)
The pressure proof of the pressure switch.
TASK 27-48-03-005-001
2. Nose Gear Pressure Switch Functional Test (Fig. 501)____________________________________________________
A. Special Tools and Equipment
(1)
G12001-50 - Rig Pin Kit
B.
Standard Tools and Equipment
(1)
Clean, dry air or nitrogen bottle capable of pressurizing shock strut to 1800 psi
C.
References
(1)
AMM 09-11-00/201, Towing
(2)
AMM 32-00-30/201, Landing Gear Door Locks
(3)
IPC 32-21-01 Fig. 4
(4)
SSM 31-51-13
(5) 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：747-400 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 4(30)
