B.
Access
(1)
Location Zones
504/604 Thrust Reverser - Left
505/605 Thrust Reverser - Right
101 Control Cabin - Left
102 Control Cabin - Right
205 Electronic Compartment
C.
Procedure
S 845-221-C00
(1)
If not already done, do the paragraph: Prepare for the System Tests.
S 495-046-C00
(2)
With the Detent System Test Switch, C75001, press and hold the Air Sensing switch, S1, on the E11 landing gear logic shelf (Fig. 501).
S 865-047-C00
(3)
Open these circuit breakers:
(a) On the P18 panel:
1) RADIO ALTM-1
2) RADIO ALTM-2
S 865-222-C00
(4) Move both of the reverse thrust levers up and aft to the extended position.
(a)
Make sure that the reverser sleeves on both reversers do not extend.
(b)
Make sure that both REVERSER UNLOCKED lights on the center instrument panel remain off.
(c)
Make sure that both REVERSER lights on the aft overhead panel remain off.
(d)
Make sure that both reverse thrust levers move only to the extended position.
S 865-223-C00
(5) Move both of the reverse thrust levers forward and down to the retracted position.
(a)
Make sure that both REVERSER UNLOCKED lights remain off.
(b)
Make sure that both REVERSER lights remain off.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-31-00
ALL ú ú C02A Page 511 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
BASE PLATE
Detent System Test Switch
Figure 501
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-31-00
ALL ú ú C02A Page 512 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
H25172
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 845-224-C00
(6) Put the airplane back to its usual configuration (or continue with the tests).
TASK 78-31-00-735-195-C00
8. Auto-Restow and Sync-Lock Test
______________________________
A. General
(1) This test is done separately for the left and right thrust reverser halves on engines 1 and 2.
NOTE: To reset the SLEEVE DISAGREE light on the sixteen light
____ Engine Accessory Unit, the thrust reverser must be deployed, and then press and hold the T/R RESET No. 1(No. 2) switch for at least two seconds.
(2)
The lockpin C78004-2 is included as part of the kit C78004-1, Lockpin Equipment - Thrust Reverser Translating Sleeve. The kit C78004-1 is included as a part of the fly-away kit 65-73733-1.
B.
Equipment
(1)
C78004-2 Lockpin for the Control Valve Module
C.
References
(1)
AMM 29-15-00/201, Hydraulic System
(2)
AMM 71-00-50/101, Power Plant
(3)
AMM 71-11-02/201, Fan Cowl Panels
(4)
AMM 78-31-00/201, Thrust Reverser System
D.
Access
(1)
Location Zones
502/602 Fan Cowl Panel - Left
503/603 Fan Cowl Panel - Right
504/604 Fan Cowl Panel - Left
505/605 Fan Cowl Panel - Right
101 Control Cabin - Left
102 Control Cabin - Right
205 Electronic Compartment
E.
Procedure
S 865-196-C00
(1) If not already done, do the paragraph:
Prepare for the System Tests.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：737-300 400 500 AMM 飞机维护手册 EXHAUST(37)
