(k)
Pull the power unit aft until the quill shaft is clear at the forward gearbox and brake assembly (Detail D).
(l)
Remove the power unit.
TASK 52-32-02-404-004
3. Install the Lift Power Unit (Fig.___________________________401)
A. Standard Tools and Equipment
(1)
Wood blocks (use to protect splines)
(2)
A short shaft with internal splines (optional to the wood blocks)
B.
Consumable Materials
(1)
D00013 Grease - MIL-G-23827
C.
References
(1)
25-21-04/401, Sidewall and Ceiling Insulation
(2)
52-32-00/001, Side Cargo Door
(3)
IPC 52-32-02 Fig 2
(4)
SSM 52-32-01
(5)
WDM 52-32-11, 52-32-12
D.
Access
(1)
Location Zone
261 Main Deck STA 1720 To STA 2040
(2)
Access Panels
836L Door - Main Deck Cargo
E.
Procedure
S 644-005
(1)
Lubricate these parts with grease:
(a)
The torque tube splines
(b)
The quill shafts
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-32-02
ALL ú ú 02 Page 404 ú Feb 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(c)
The power unit shafts
(d)
The gearbox shafts.
S 424-006
(2)
Install the quill shaft on the forward gearbox and brake assembly shaft.
S 424-007
(3)
Install the lift power unit.
(a)
Engage the forward shaft of the power unit with the quill shaft on the forward gearbox and brake assembly.
NOTE: Turn the manual drive shaft on the power unit
____ clockwise to align the quill shaft and the power unit shaft.
(b) Install the four bolts that attach the power unit to the structure.
NOTE: Two of these bolts go through the forward gearbox
____
and brake assembly.
(c)
Put the shim (if used) between the flange of the power unit and the support bracket.
(d)
Install the screw that attaches the power unit to the support bracket.
(e)
Put the forward end of the torque tube on the power unit shaft.
(f)
Make sure the coupling on the aft end of the torque tube, aligns with the shaft on the aft gearbox and brake assembly (Detail C).
(g)
If it is necessary to align the coupling with the shaft, do these steps:
CAUTION: PROTECT THE SPLINES IF YOU USE THEM TO TURN
_______ THE SHAFT. YOU CAN EASILY CAUSE DAMAGE TO THE SPLINES.
1) Cover the splines on the power unit shaft with short wood blocks or a short shaft with internal splines.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-32-02
ALL ú ú 02 Page 405 ú Feb 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
2) Turn the power unit shaft to align the coupling and the shaft (Detail C).
(h)
Install the bolt through the splined fitting and the coupling (Detail C).
(i)
Install the bolt through the coupling and the aft gearbox and brake assembly (Detail C).
(j)
Install the quill shaft on the manual drive gearbox.
(k)
Align the quill shaft with the internal splines in the power unit.
NOTE: Turn the manual drive if it is necessary to align
____
the quill shaft and the splines.
(l)
Install the manual drive gearbox on the structure with four screws (Detail B).
(m)
Install electrical connector DX209.
S 864-008
(4)
Close these circuit breakers for the side cargo door.
(a)
P415 Power Distribution Center - Right
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 舱门 DOORS 2(138)
