(a)
Put the oil in the engine oil tank if it is necessary (AMM 12-13-11/301).
S 842-092-C00
(14)
Make a check of the oil quantity in the generator.
(a)
Put the oil in the generator if it is necessary
(AMM 12-13-21/301).
S 842-093-C00
(15)
Make sure the thrust reversers are closed and latched (AMM 78-31-00/201).
S 842-094-C00
(16)
Make sure the fan cowl panels are closed and latched (AMM 71-11-02/201).
NOTE: The panels can be open for engine operation under the
____
conditions specified in Cowling Limits.
S 842-095-C00
CAUTION: USE OF THE PLUG-IN PERSONNEL INLET BARRIER IS LIMITED TO
_______ ENGINE OPERATION OF 55 %N1 MAXIMUM.
(17)
Install the engine inlet guard or inlet barrier at the inlet area.
S 842-097-C00
(18)
Use the safety lanyard if you must be near the engine.
S 842-098-C00
(19)
Make sure these levers are in the correct position (Fig. 207).
(a)
The forward thrust lever is in the idle position,
(b)
The reverse thrust lever is in the stow position.
(c)
The start lever is in the CUTOFF position.
S 842-099-C00
(20) On the aft electronics panel (P8), make sure the fire switches are fully in.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-00
ALL ú ú C11 Page 248 ú Mar 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SEE A REVERSE THRUST LEVERS LEVERS FORWARD THRUST
START LEVERS
CONTROL STAND
A
Control Stand Location Figure 207
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-00
ALL ú ú C03 Page 249 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
F. Operate the Engine
S 862-100-C00
(1) Prepare the check sheet to make a record of the engine data during the start and the ground operations.
NOTE: Refer to AMM 71-00-00/501 for an example of the engine data
____
sheet.
(a) Use the trim tables for idle power (AMM 71-00-01/201) to find the speed targets for the OAT and barometric pressure. 1) Make a record of the speed targets.
S 862-101-C00
(2)
On the forward overhead panel P5, make sure these switches are in the correct position:
(a)
The BAT (Battery) Switch
on the
AC and DC Metering Panel -ON
(b)
The AC METERS selector on the AC and DC Metering Panel -GRD PWR or APU GEN
(c)
The GRD POWER switch on the
Ground Power and
Generator Ammeter Panel -ON
if external power is used
(d)
All FWD, CTR, and AFT
FUEL PUMPS switches
on the Fuel Control Panel -OFF
(e)
The L PACK and R PACK
switches on the
Pneumatic Control Panel -OFF
(f)
The ISOLATION VALVE switch on
the Pneumatic Control Panel -OPEN
(g)
The applicable No. 1 or 2 BLEED switch on the Pneumatic Control Panel -ON or OFF
as necessary
(h)
The WING ANTI-ICE switch on
the Anti-Ice Control Panel -OFF
(i)
The applicable
No. 1 or 2 ENG ANTI-ICE
switch on the
Anti-Ice Control Panel -OFF
(j)
The HYD PUMPS
"A" ENG 1 and ELEC 2 and
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 动力装置 POWER PLANT 1(29)