S 622-010-C00
(1)
Do the procedure for the initial 10 day preservation procedure.
(a)
There is no limit on the number of times you can do this procedure.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-03
ALL ú ú C01 Page 204 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
D. Not Serviceable Power Plant
S 622-012-C00
(1) You must do one of the procedures that follow:
(a) The power plant preservation procedure for up to 30 days (not serviceable power plant).
NOTE: This would allow preservation for up to 30 days maximum
____ from time of last engine operation or from accomplishment of engine dry-out procedure, as applicable.
(b) The power plant preservation procedure for 30 to 365 days (not serviceable power plant) if the preservation renewal procedure is to be done.
TASK 71-00-03-622-013-C00
4. Power Plant Preservation - Up to 30 Days - Serviceable and Not Serviceable
__________________________________________________________________________
Power Plant
___________
A. General
(1)
The procedures in AMM 71-00-03/201 are for engines that are installed on-wing. Procedures for engines that are removed from the airplane are in the CFMI Engine Shop Manual, Section 72-00-00, Page 1201.
B.
Equipment
(1)
Engine Inlet and Exhaust Covers - C10001-1 and
C10001-2 are replaced by commercial equipment
as follows:
Langdon Manufacturing Co.,
222 N. Hydraulic, P.O. Box 11026,
Wichita, KS 67202
-Inlet cover part No. LMC11G84-1
-Exhaust cover part No. LMC11G84-2, or
Texstar Plastics,
802 Ave J East, P.O. Box 534036,
Grand Prairie, TX 75051
-Inlet cover part No. 5101505
-Exhaust cover part No. 5101504
(2)
Bag - Engine, Tool No. 856A3505,
(necessary if the engine is to be stored
off-wing)
CFM International, P.O. Box 15514,
Cincinnati, OH 45215
(3)
Cover - Waterproof
(necessary if the engine is to be stored
on-wing) - Locally available
(4)
Tape - Locally available
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-03
ALL ú ú C01 Page 205 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
C. Consumable Materials
(1)
Film, Vapor Barrier - CP2160 (AMM 70-10-01/201)
(2)
Actigel (Desiccant) - CP2098 (AMM 70-10-01/201)
D.
References
(1)
AMM 71-00-00/201, Power Plant
(2)
AMM 75-32-00/201, Variable Bleed Valve
E.
Access
(1)
Location Zones
506 Engine No. 1
606 Engine No. 2
F.
Power Plant Preservation (Serviceable)
NOTE: You can ignore the first three steps that follow if they
____
were done during the last engine operation (flight cycle). Under
these conditions, consider engine preserved for 30 days from time
of last operation.
S 862-014-C00
WARNING:_______USE AMM 71-00-00/201 TO OPERATE THE POWER PLANT. IF YOU DO NOT USE THIS PROCEDURE, YOU CAN CAUSE DAMAGE TO EQUIPMENT OR INJURY TO PERSONS.
(1)
Use the Power Plant Operation (Normal) procedure to start the engine (AMM 71-00-00/201).
S 862-015-C00
(2)
Let the engine become stable at low idle for 15 to 20 minutes.
S 862-016-C00
(3)
Use the Power Plant Operation (Normal) procedure to do the engine
shutdown (AMM 71-00-00/201).
S 432-017-C00
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 动力装置 POWER PLANT 1(151)
