71-00-03
ú ALL ú
ú ú ú C01.101 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 210Jul 12/02
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(2)
The procedures in AMM 71-00-03/201 are for engines that are installed on-wing. Procedures for engines that are removed from the airplane are in the CFMI Engine Shop Manual, Section 72-00-00, Page 1201.
B.
Equipment
(1)
Cart, Nitrogen - Tool No. 856A1115,
CFM International, P.O. Box 15514,
Cincinnati, OH 45215
(2)
Cart or Pump, with volume measuring device -capable of supplying oil at 0-50 psi
(0-345 kPa) through a 10 micron filter
(3)
Protective Mat (two required) -Rubber Manufacturer's Association - Grade SC43,
neoprene sponge, 1 inch thick, approximately
3 x 4 feet with warning streamers attached
(4)
Gloves - Heavy Protective,
Local purchase
(5)
Protective Covering, waterproof -Local purchase
(6)
Container - 10 gallon (40 liter) capacity,
suitable for oil and fuel
C.
Consumable Materials
(1)
Actigel (Desiccant) - CP2098 (AMM 70-10-01/201)
(2)
Film, Vapor Barrier - CP2160 (AMM 70-10-01/201)
(3)
Oil, Lubricating - MIL-L-6081, Grade 1010 -CP2850 (AMM 70-10-01/201)
(4)
Graphite Grease - CP2101 (AMM 70-10-01/201)
(5)
Lubricant - Aerolubriplate (AMM 70-10-01/201)
(6)
Petrolatum - Pure Mineral, CP2102
(AMM 70-10-01/201)
(7)
Oil - Engine (AMM 70-10-01/201)
(8)
Oil - Preservative
(containing a corrosion inhibitor),
MIL-L-6085, CP2259 (AMM 70-10-01/201)
(9)
Oil, Additive - Anti-Corrosion,
CP2309 (AMM 70-10-01/201)
(10)
Tape - Local purchase
D.
References
(1)
AMM 12-13-11/301, Engine Servicing
(2)
AMM 24-22-00/201, Electrical Power
(3)
AMM 71-00-00/201, Power Plant
(4)
AMM 73-11-02/401, Fuel Filter
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-03
ALL ú ú C01 Page 211 ú Jul 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(5)
AMM 75-32-00/201, Variable Bleed Valve
(6)
AMM 79-21-04/401, Scavenge Oil Filter
(7)
AMM 79-21-05/201, Magnetic Chip Detectors
E.
Access
(1)
Location Zones
506 Engine No. 1
606 Engine No. 2
F. Power Plant Preservation (Serviceable) (Fig. 201) ú ú S 612-131-C00 ú ú
CAUTION:_______DO NOT APPLY A SPRAY OF PRESERVATIVE OIL OR AN EQUIVALENT OIL ú INTO THE ENGINE INLET, CORE COMPRESSOR OR TURBINE, OR ENGINE ú EXHAUST. DIRT PARTICLES THAT ATTACH TO THE WET BLADES AND ú VANES CAN DECREASE ENGINE PERFORMANCE DURING THE SUBSEQUENT ú ENGINE OPERATION. ú
(1)
Fill the engine oil tank (AMM 12-13-11/301) with a minimum of 20 quarts (19 liters) of one of the mixtures that follow:
(a)
Engine oil and at least 5 percent by volume preservative oil (CP2259) or,
(b)
Engine oil and a minimum of 7 percent by volume anit-corrosion oil additive (CP2309).
S 432-048-C00
(2)
Install pad covers and gaskets on all accessory drive pads if you remove an accessory unit.
S 622-049-C00
(3)
Do the engine fuel system preservation.
(a)
Drain the fuel supply line.
(b)
Supply the electrical power (AMM 24-22-00/201). 1) Remove the DO-NOT-OPERATE tag from the BAT switch.
(c)
Make sure the applicable start lever is in the CUTOFF position.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 动力装置 POWER PLANT 1(154)
