71-00-03
ALL ú ú C01 Page 202 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
M. You must do the engine dry-out procedure when an engine has had an
in-flight shutdown, and when an engine that is not serviceable will be
preserved for a long time.
N. The procedures in AMM 71-00-03/201 are for engines that are installed
on-wing. Procedures for engines that are removed from the airplane are
in the CFMI Engine Shop Manual, Section 72-00-00, Page 1201.
TASK 71-00-03-622-001-C00
2. Power Plant Preservation - Up to 10 Days - Serviceable and Not Serviceable__________________________________________________________________________ Power Plant___________
A. General
(1)
The procedures in AMM 71-00-03/201 are for engines that are installed on-wing. Procedures for engines that are removed from the airplane are in the CFMI Engine Shop Manual, Section 72-00-00, Page 1201.
B.
Equipment
(1)
Engine Inlet and Exhaust Covers - C10001-1 and
C10001-2 are replaced by commercial equipment
as follows:
Langdon Manufacturing Co.,
222 N. Hydraulic, P.O. Box 11026,
Wichita, KS 67202
-Inlet cover part No. LMC11G84-1
-Exhaust cover part No. LMC11G84-2, or
Texstar Plastics,
802 Ave J East, P.O. Box 534036,
Grand Prairie, TX 75051
-Inlet cover part No. 5101505
-Exhaust cover part No. 5101504
C. References
(1)
AMM 71-00-00/201, Power Plant
D.
Access
(1)
Location Zones
506 Engine No. 1
606 Engine No. 2
E.
Power Plant Preservation (Serviceable)
S 862-002-C00
WARNING:_______USE AMM 71-00-00/201 TO OPERATE THE POWER PLANT. IF YOU DO NOT USE THIS PROCEDURE, YOU CAN CAUSE DAMAGE TO EQUIPMENT OR INJURY TO PERSONS.
(1) Use the Power Plant Operation (Normal) procedure to start the engine (AMM 71-00-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-00-03
ALL ú ú C01 Page 203 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 862-003-C00
(2)
Let the engine become stable for 3 minutes at low idle.
S 862-004-C00
(3)
Use the Power Plant Operation (Normal) procedure to do the engine shutdown (AMM 71-00-00/201).
S 432-005-C00
(4)
Install the inlet and exhaust covers to prevent fan windmilling and to prevent foreign object damage (FOD).
F.
Power Plant Preservation (Not Serviceable)
S 862-006-C00
(1)
If the engine has had an in-flight shutdown, do the engine dry-out procedure (Ref paragraph 13).
S 432-007-C00
(2)
Install the inlet and exhaust covers to prevent fan windmilling and to prevent foreign object damage (FOD).
S 622-008-C00
(3)
Consider engine preserved for 10 days from time of last operation or from accomplishment of engine dry-out procedure, as applicable.
TASK 71-00-03-622-009-C00
3. Power Plant Preservation Renewal - Up to 10 Days - Serviceable and__________________________________________________________________ Not Serviceable Power Plant___________________________
A. General
(1)
The procedures in AMM 71-00-03/201 are for engines that are installed on-wing. Procedures for engines that are removed from the airplane are in the CFMI Engine Shop Manual, Section 72-00-00, Page 1201.
B.
Access
(1)
Location Zones
506 Engine No. 1
606 Engine No. 2
C.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 动力装置 POWER PLANT 1(150)
