Leading Edge Flap Nose Linkage Adjustment
Figure 503 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-81-00
ALL ú ú 01 Page 505 ú Nov 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
FLAP NOSE LINK
FLAP ACTUATOR
B
FLAP NOSE LINK
HINGE (5 LOCATIONS)
FLAP
PANEL
FLAP A
NOSE ROD
INBOARD FLAP NOSE A FUEL BOOST
(OUTBOARD SECTION) PUMP
FLAP NOSE FLAP
HINGE NOSE LINK
B
FLAP NOSE ROD
OPERATING
FWD INBD CRANK
CRANK
ADJUSTABLE LINK INBOARD FLAP NOSE
INBOARD FLAP (FLAP NO. 2 SHOWN)
(INBOARD SECTION)
B
FUEL LEADING EDGE BOOST FLAP CAVITY PUMP
FLAP NOSE UPSTOP
LEADING EDGE FLAP
1
1
FWD
1
1 0.06 |0.03 INCH MINIMUM CLEARANCE FLAP
NOSE
2 IF THE FLAP NOSE TOUCHES THE FLAP NOSE UPSTOP AND ALL OTHER DIMENSIONS ARE CORRECT, THE CLEARANCE
A-A
BETWEEN FLAP NOSE AND FUEL BOOST PUMP CAN BE MORE THAN 1
Leading Edge Flap Linkage Adjustment Figure 503 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-81-00
ALL ú ú 01 Page 506 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
INITIAL LENGTH
8.18 |0.01 INCHES
(OUTBOARD FLAP)
8.30 |0.01 INCHES
(INBOARD FLAP)
FLAP NOSE LINK (NON-ADJUSTABLE)
FLAP PANEL WING
LEADING
EDGE
NOSE
LINK FLAP
INITIAL LENGTH FLAP5.24 |0.04
PANELINCHES
CRANK ADJUSTABLE LINK CRANK
FLAP NOSE ROD
FLAP PAD
SEE C FLAP PAD
SEE C
INITIAL LENGTH
2.73 |0.04 INCHES
FLAP NOSE FLAP NOSE
OUTBOARD FLAP AND OUTBOARD FLAP NOSE INBOARD FLAP NOSE SECTION
SECTION LINKAGE OF INBOARD FLAP LINKAGE OF INBOARD FLAP
B-B B-B
OUTBOARD FLAP THE FLAP NOSE MUST (NO. 1 OR 4) INBOARD FLAP
(NO. 2 OR 3)
3 TOUCH THE PADS
SEAL DOOR
INBD
FLAP NOSE
FLAP NOSE
C
THE FLAP NOSE MUST TOUCH THE FLAP.
A MAXIMUM CLEARANCE OF 0.02 INCH
IS PERMITTED.
3
Leading Edge Flap Linkage Adjustment
Figure 503 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-81-00
ALL ú ú 01 Page 507 ú Nov 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 865-044
WARNING:_______ MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDERS,
ELEVATORS, TRAILING EDGE FLAPS, LEADING EDGE FLAPS AND SLATS,
SPOILERS, LANDING GEAR, AND THRUST REVERSERS CAN MOVE QUICKLY
WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURY TO
PERSONS AND DAMAGE TO EQUIPMENT.
CAUTION: MAKE SURE THAT THE INBOARD AND OUTBOARD FAN DUCT COWLS AND THE
_______ THRUST REVERSERS ARE CLOSED OR REMOVED BEFORE YOU EXTEND THE LEADING EDGE FLAPS AND SLATS. THERE IS NOT SUFFICIENT CLEARANCE FOR THE LEADING EDGE FLAPS AN SLATS TO EXTEND IF THE INBOARD AND OUTBOARD FAN DUCT COWLS AND THE THRUST REVERSERS ARE IN THE OPEN (MAINTENANCE) POSITION. THIS CAN CAUSE DAMAGE TO EQUIPMENT.
(2) Pressurize the hydraulic system B (Ref 27-81-00/201).
S 865-006
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LEADING
_______ EDGE FLAPS AND SLATS. THE FLAPS WILL AUTOMATICALLY EXTEND AT ALL EXTEND POSITIONS OF THE TRAILING EDGE FLAPS. THE SLATS WILL AUTOMATICALLY EXTEND WHEN THE TRAILING EDGE FLAPS EXTEND TO THE 1, 2 OR 5-UNIT POSITIONS. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 6(30)
