• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-01 19:23来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

INBD  CARRIAGE HALF 
FWD  CROSSBEAM  A 

Inboard Midflap Carriage Wear Limits
Figure 601 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-14
 ALL  ú ú 01 Page 602 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
1. ECCENTRIC

A-A

INDEX NO. PART NAME  DIM.  DESIGN LIMITS  WEAR LIMITS  REPLACE PART WORN  REPAIR WORN PART  REPAIR INSTR. 
DIAMETER  PER-WEAR DIM. MITTED  DIA CLEAR-ANCE MAX 
MIN  MAX 
1  ECCENTRIC BUSHING  ID  0.8745  0.8781  0.8826  0.0081 X 
BOLT  OD  0.8740  0.8745  0.8664 X 
2  ROLLER  ID  0.8743  0.8750  0.8765  0.0020  X 
BOLT  OD 0.8740  0.8745  0.8723  X 

Inboard Midflap Carriage Wear Limits
Figure 601 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-14
 ALL  ú ú 01 Page 603 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 INBOARD FLAP TOGGLE - REMOVAL/INSTALLATION
__________________________________________
 1.  General_______
 A.  There are two tasks in this procedure. There is a task for the removal and a task for the installation of a toggle assembly on the inboard flap.
 B.  You can remove the toggle assemblies for the inboard flaps without the removal of the foreflap.
 C.  You must remove the forward and the aft cam follower bearings to remove the toggle assembly.
 D.  There are access holes in the main carriage cams which you use to remove the cam follower bearings.
 E.  If you will replace the two toggle assemblies on a flap, remove the two toggle assemblies one at a time.
 TASK 27-51-17-004-001
 2.  Inboard Flap Toggle Assembly Removal (Fig. 401)____________________________________
 A.  References
 (1)
27-51-00/201, Trailing Edge Flap System

 (2)
27-51-32/401, Inboard Flap Track Fairings

 B.  
Access

 (1)  
Location Zone 309, 409 Wing Trailing Edge Inboard Flap and Spoilers

 C.  
Procedure

 (1)
Remove the inboard flap track fairing (Ref 27-51-32/401).

 (2)
Supply the system B hydraulic power (Ref 27-51-00/201).

 (3)
Move the flap control lever to the 15-unit detent.

 (4)
Remove the system B hydraulic power (Ref 27-51-00/201).


 S 014-002
 S 864-003
 S 864-004
 S 864-005
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-17
 ALL  ú ú 01 Page 401 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

BEARINGMAIN CARRIAGE CAM BEARING
A-A
Inboard Flap Toggle Assembly Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-17
 ALL  ú ú 01 Page 402 ú Mar 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL


Inboard Flap Toggle Assembly
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-51-17
 ALL  ú ú 01 Page 403 ú Jul 15/91
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 4(18)