FLAP CARRIAGE
EXAMPLE INBOARD FLAP GIMBAL
DIMENSION "X"
GIMBAL YOKE A
BALLSCREWCLAMP-UP NUTBOLT
A
FLAP DRIVE BALLSCREW
A
FWD ATTACH FITTING UPSTOP
SEE A
+0.004
0.006 INCH
-0.000
0.01 INCH MIN (EXAMPLE) CLEARANCE (4 LOCATIONS) WHEN THE OPPOSITE SURFACE TOUCHESATTACH FITTING BALLSCREW NUT
INBD
BUSHING
(GIMBAL HORIZONTAL)
GIMBAL BUSHING SHIM VERTICAL (EXAMPLE) GIMBAL (EXAMPLE)
OUTBOARD FLAP GIMBAL A-A
Flap Drive Ballscrew Installation Figure 402
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-71
ALL ú ú 01 Page 405 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 024-014
(4)
Remove the transmission:
(a)
Remove the four bolts that attach the transmission to the flap track.
(b)
Remove the transmission from the airplane.
E.
Remove an Inboard Flap Inboard Transmission (No. 4 or 5)
S 034-015
(1)
Disconnect the transmission ballscrew from the gimbal (Fig. 402):
(a)
Remove the four bolts that attach the gimbal yoke to the ballscrew nut.
(b)
Remove the bushings from the ballscrew nut.
S 034-016
(2)
Disconnect the torque tubes from the flap transmission (Fig. 401):
(a)
Remove the screws that attach the coupling sleeve to the coupling on the transmission.
(b)
Move the coupling sleeves off the coupling.
(c)
Disconnect the torque tube from the coupling.
S 034-017
(3)
If it is necessary, remove the two bolts at the universal joint to disconnect the ballscrew from the transmission.
S 024-018
(4)
Remove the transmission:
(a)
Remove the four bolts that attach the transmission to the flap track.
(b)
Remove the transmission from the airplane.
F.
Remove an Inboard Flap Outboard Transmission (No. 3 or 6)
S 034-019
(1)
Disconnect the transmission ballscrew from the gimbal (Fig. 402):
(a)
Remove the four bolts that attach the gimbal yoke to the ballscrew nut.
(b)
Remove the bushings from the ballscrew nut.
S 034-020
(2)
Disconnect the torque tubes from the flap transmission (Fig. 401):
(a)
Remove the screws that attach the coupling sleeve to the coupling on the transmission.
(b)
Move the coupling sleeves off the coupling.
(c)
Disconnect the torque tube from the coupling.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-71
ALL ú ú 01 Page 406 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 034-021
(3)
Remove the two bolts at the universal joint to disconnect the ballscrew from the transmission.
S 014-022
(4)
Remove the aileron pulley.
S 014-023
(5)
Disconnect the fire extinguisher line:
(a)
Turn the fire extinguisher line until it is clear of the transmission.
(b)
Install a cap on the two ends of the fire extinguisher line.
S 014-024
(6)
Remove the hydraulic line aft of the transmission.
(a)
Install a cap on the two ends of the hydraulic line.
S 024-025
(7)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 4(105)