31-51-00
 ALL  ú ú 09 Page 505 ú Jun 18/01 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A  
747-400  
MAINTENANCE MANUAL 
 (a)  Put C/010/350/00 in the scratchpad. 
 (b)  Push the LSK adjacent to -/---/---/-- prompt. 
 (c)  Make sure bits 11 to 22 are 0. 
 (d)  Set the R IRS switch on the pilots overhead panel, P5, to OFF. 
 (e)  Make sure bit 17 is 1. 
 (f)  Set the R IRS switch on the pilots overhead panel, P5, to ALIGN 
 or NAV mode. 
 (g)  Open this circuit breaker: 
 1) P7, Overhead Circuit Breaker Panel 
 a) 7C23, FMCS FMC R 
 (h)  Make sure bit 18 is 1. 
 (i)  Close this circuit breaker: 
 1) P7, Overhead Circuit Breaker Panel 
 a) 7C23, FMCS FMC R 
 (j)  Open this circuit breaker: 
 1) P7, Circuit Breaker Panel 
 a) 7C21, RADIO ALTM R 
 (k)  Make sure bit 19 is 1. 
 (l)  Close this circuit breaker: 
 1) P7, Overhead Circuit Breaker Panel 
 a) 7C21, RADIO ALTM R 
 (m)  Open this circuit breaker: 
 1) P7, Overhead Circuit Breaker Panel 
 a) 7F26, PSEU SECT 2 
 (n)  Make sure bit 21 is 1. 
 (o)  Close this circuit breaker: 
 1) P7, Overhead Circuit Breaker Panel 
 a) 7F26, PSEU SECT 2 
 (p)  Open these circuit breakers: 
 1) P7, Overhead Circuit Breaker Panel 
 a) 7C16, FLT CONT ELEC 2R AC 
 b) 7C17, FLT CONT ELEC 2R DC 
 (q)  Make sure bit 22 is 1. 
 (r)  Close these circuit breakers: 
 1) P7, Overhead Circuit Breaker Panel 
 a) 7C16, FLT CONT ELEC 2R AC
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 31-51-00
 ALL  ú ú 07 Page 506 ú Jun 18/01 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A 
747-400 MAINTENANCE MANUAL
 b)  7C17, FLT CONT ELEC 2R DC
 (s)  
Open these circuit breakers:
 1)  P7, Overhead Circuit Breaker Panel
 a) 7A14, ADC R PWR
 (t)  
Make sure bit 20 is 1.
 (u)  
Close this circuit breaker:
 1)  P7, Overhead Circuit Breaker Panel
 a) 7A14, ADC R PWR
 (v)  
Make sure bits 14 and 20 are 0.
 S 715-036
 (6)  Do these steps to check the output bus for the Left Stall Warning Master card:
 NOTE: After you open circuit breakers or change the switch
____ position, permit 10 to 15 seconds for the bit conditions to change.
 (a)  
Put E/104/350/10 in the scratchpad.
 (b)  
Push the LSK adjacent to -/---/---/-- prompt.
 (c)  
Make sure bits 11 to 22 are 0.
 (d)  
Open these circuit breakers:
 1)  P7, Overhead Circuit Breaker Panel
 a) 7C14, FLT CONT ELEC 1R AC
 b) 7C15, FLT CONT ELEC 1R DC
 (e)  
Make sure bit 21 is 1.
 (f)  
Close these circuit breakers:
 1)  P7, Overhead Circuit Breaker Panel
 a) 7C14, FLT CONT ELEC 1R AC
 b) 7C15, FLT CONT ELEC 1R DC
 (g)  
Open these circuit breakers:
 1)  P7, Overhead Circuit Breaker Panel
 a) 7E09, MCP L
 b) 7E18, MCP R
 (h)  
Make sure bit 22 is 1.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 31-51-00
 ALL  ú ú 10 Page 507 ú Jun 18/01 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A 
747-400 MAINTENANCE MANUAL
 (i)  
Close these circuit breakers:
 1)  P7, Overhead Circuit Breaker Panel
 a) 7E09, MCP L
 b) 7E18, MCP R
 (j)  
Open this circuit breaker:
 1)  P7, Overhead Circuit Breaker Panel
 a) 7A10, ADC L PWR
 (k)  
Make sure bit 18 is 1.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 指示/记录系统 2(8)