747-400 AMM 飞机维护手册 指示/记录系统 2(134)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 landing gear system.
 (j)  Make sure the EICAS primary engine parameters page shows
 caution level or advisory level messages.
 (k)  Push the CANC button on the EICAS DSP.
 1) Make sure the EICAS primary engine parameters page does not
 show caution level or advisory level messages.
 NOTE: It may be necessary to push the CANC button more____
 than once to remove all of the caution and the
 advisory level messages.
 (l)  Push the RCL button on the EICAS DSP.
 1) Make sure the EICAS primary engine parameters page shows
 caution level or advisory level messages.
 (m)  Close this circuit breaker:
 1) P7 Overhead Circuit Breaker Panel
 a) 7F11, EFIS CONT L
 (n)  Open this circuit breaker:
 1) P7 Overhead Circuit Breaker Panel
 a) 7F16, EFIS CONT R
 (o)  Push the ENG button on the EICAS DSP.
 1) Make sure the lower IDU shows the secondary engine
 parameter.
 (p)  Push the STAT button on the EICAS DSP.
 1) Make sure the lower IDU shows the status page.
 (q)  Push the ELEC button on the EICAS DSP.
 1) Make sure the lower IDU shows the synoptic page for the
 electrical system.
 (r)  Push the FUEL button on the EICAS DSP.
 1) Make sure the lower IDU shows the synoptic page for the
 fuel system.
 (s)  Push the ECS button on the EICAS DSP.
 1) Make sure the lower IDU shows the synoptic page for the
 environmental control system.
 (t)  Push the HYD button on the EICAS DSP.
 1) Make sure the lower IDU shows the synoptic page for the
 hydraulic system.
 (u)  Push the DRS button on the EICAS DSP.
 1) Make sure the lower IDU shows the synoptic page for the
 doors.
 (v)  Push the GEAR button on the EICAS DSP.
 1) Make sure the lower IDU shows the synoptic page for the
 landing gear.
 (w)  Make sure the EICAS primary engine parameters page shows
 caution level or advisory level messages.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú ú 05 Page 513 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (x)  Push the CANC button on the EICAS DSP.
 1)  Make sure the EICAS primary engine parameters page does not show caution level or advisory level messages.
 NOTE: It may be necessary to push the CANC button more
____ than once to remove all of the caution and the advisory level messages.
 (y)  
Push the RCL button on the EICAS DSP.

 1)  Make sure the EICAS primary engine parameters page shows caution level or advisory level messages.

 (z)  
Close this circuit breaker:

 1)  P7 Overhead Circuit Breaker Panel a) 7F16, EFIS CONT R
 (aa) Push the ENG button on the EICAS DSP. 1) Make sure the lower IDU shows the secondary engine parameter.
 S 865-804
 (2) Remove electrical power if it is not necessary (AMM 24-22-00/201).
 J.  Captain's (First Officer's) Display Transfer Module Test
 S 735-805
 (1)  Do a test of the INBD CRT switch:
 (a)  
Set the INBD CRT switch to the PFD position. 1) Make sure the inboard IDU shows the PFD format.

 (b)  
Set the INBD CRT switch to the EICAS position.

 1)  Make sure the inboard IDU shows the EICAS secondary engine parameter format.

 (c)  
Set the INBD CRT switch to the NORM position. 1) Make sure the inboard IDU shows the ND format.

 S 735-806
 (2)  Do a test of the LWR CRT switch:
 (a)  
Set the LWR CRT switch to the ND position. 1) Make sure the lower IDU shows the ND format.

 (b)  
Set the LWR CRT switch to the EICAS PRI position.

 1)  Make sure the lower IDU shows the EICAS primary engine parameter format.

 (c)  
Set the LWR CRT switch to the NORM position.

 1)  Make sure the lower IDU shows the EICAS secondary engine parameter format.
 S 735-809
 (3)  Do a test of the ALTN EFIS switch:
 (a)  
Set the STANDBY POWER switch on the P5 electrical power control panel to the AUTO position.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 指示/记录系统 2(134)