• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-12 10:04来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 S 865-861
 (1)  Prepare the IDS for the test:
 (a)  
Set the INBD CRT switch on the first officer's display transfer module to the EICAS position. 1) Make sure the inboard IDU shows the EICAS secondary engine

 format.

 (b)  
Set the INBD CRT switch on the captain's display transfer module to the EICAS position. 1) Make sure the inboard IDU shows the EICAS secondary engine

 format.

 (c)  
Set the EIU switch on the captain's source select module to the L position.

 (d)  
Set the EIU SEL switch on the EICAS control panel/FMC switch to the C position.

 (e)  
Set the EIU switch on the first officer's source select module to the R position.


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú ú 07 Page 536 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 865-862
 (2)  Prepare the CDU for the test (Fig. 504):
 (a)  
Push the MENU key on the CDU to show the MENU.

 (b)  
Push the line select key (LSK) that is adjacent to <CMC to show the CMC MENU.

 (c)  
If <RETURN shows after you push the LSK, push the LSK that is adjacent to <RETURN until you see the CMC MENU.

 (d)  
Push the LSK that is adjacent to <EICAS MAINT PAGES to show the EICAS MAINT PAGES menu.

 (e)  
Push the NEXT PAGE key until you find <31 CONFIG.

 (f)  
Push the LSK adjacent to <31 CONFIG to show the EICAS PAGE CONTROL menu.


 S 755-881
 (3)  Push the LSK adjacent to <DISPLAY to show the CONFIG page.
 (a)  Make sure the CONFIG page is shown on the inboard IDUs, and the lower IDU.
 NOTE: The captain's inboard IDU shows the data from the left
____ EIU. The lower IDU shows the data from the center EIU. The first officer's inboard IDU shows the data from the right EIU.
 (b)  
Make sure that the IDS software P/N 685-2265-XXX is the same in all three IDUs.

 (c)  
Make sure that all three IDUs show the same program pin configuration: 1) GUN ALL;


 Configuration:
 ~.......................
 | 1/ 45FA 005C /32 |
 | 33/ 0276 07 /56 1/p |
 2.......................1

 S 865-863
 (4)  Set the INBD CRT switches on the captain's and the first officer's display transfer module to the NORM position.
 (a)  Make sure the captain's and the first officer's inboard IDUs show the ND format.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú ú 10 Page 537 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 


Indicating/Recording - EICAS Maintenance Pages
Figure 504 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú ú 01 Page 538 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

AUXILIARY EICAS DISPLAY

CONFIGURATION MAINTENANCE PAGE
____THE NUMBERS SHOWN ON THIS
NOTE:
PAGE ARE EXAMPLES ONLY.
Indicating/Recording - EICAS Maintenance Pages
Figure 504 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-61-00
 ALL  ú
 ú  03  Page 539
 ú  Oct 10/91 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
 (5)  S 865-864Set the EIU switch on the captain's and the first officer's source select module to the AUTO position.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 指示/记录系统 2(146)