(2)
AMM 31-61-00/001, Integrated Display System
(3)
AMM 31-61-00/501, Integrated Display System
C. Access
(1) Location Zone
221 Flight Compartment P1 Panel
221/222 Flight Compartment P2 Panel
221 Flight Compartment P3 Panel
221/222 Flight Compartment P9 Panel
221/222 Flight Compartment P10 Panel
D. Procedure To Cancel/Recall/Erase Engine Parameter Exceedance.
S 842-056
(1) Apply electrical power to the airplane (AMM 24-22-00/201).
S 752-058
CAUTION: ENSURE THAT EQUIPMENT COOLING SYSTEM IS OPERATING BEFORE
_______ TURN-ON OF AIRPLANE SYSTEMS OR DAMAGE TO EQUIPMENT MAY RESULT.
(2) Verify that equipment cooling system is operating by listening for the sound of the supply fan and the sound of the exhaust fan.
NOTE: The supply and exhaust fans are both located in the forward
____ cargo compartment. The supply fan is located behind the left-hand sidewall of Sta 560. The exhaust fan is located behind the right-hand sidewall at Sta 520.
The fans operate at approximately 11,400 rpm.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
31-61-00
ALL ú ú 02 Page 212 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 862-060
(3) Make sure that the following circuit breakers are closed:
NOTE: To obtain valid data for IDS display formats, the IDS and
____ systems which interface with the IDS must be operational. Refer to the IDS Description and Operation for the interfacing systems (AMM 31-61-00/001). Refer to the IDS Adjustment/Test for the verification of system operation (AMM 31-61-00/501).
(a)
P7, Overhead Circuit Breaker Panel
1) 7F8, UPR EICAS
2) 7F9, EIU L
3) 7F10, EIU C
4) 7F11, EFIS CONT L
5) 7F12, ND L
6) 7F13, PFD L
7) 7F14, LWR EICAS
8) 7F15, EIU R
9) 7F16, EFIS CONT R
10) 7F17, ND R
11) 7F18, PFD R
12) 7C2, FMCS CDU L
13) 7C24, FMCS CDU R
(b)
P414, Power Distribution Center - Left
1) 414L8, CMC LEFT
(c)
P415, Power Distribution Center - Right
1) 415L39, CMC RIGHT
S 802-025
(4) Cancel/Recall Engine Parameter Exceedance Annunciation (Fig. 211)
(a) To remove an engine parameter exceedance annunciation, press the CANC switch on the EICAS Display Select Panel. Make sure that the box which encloses the digital readout changes from red to white in color.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
31-61-00
ALL ú ú 03 Page 213 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(b) To recall an engine parameter exceedance annunciation, press the RCL switch on the EICAS Display Select Panel. Make sure that the box which encloses the digital readout changes from white to red in color.
S 802-026
(5) Erase Engine Parameter Exceedance (Fig. 212)
NOTE: If an engine parameter exceedance is erased using the CMC,
____ the record of that exceedance will be erased from the EICAS engine exceedance maintenance page.
(a)
Press the MENU key on the CDU. Make sure the CDU MENU is displayed.
(b)
Press the line select key (LSK) next to the <CMC prompt. Make sure the CMC MENU is displayed.
(c)
Press the NEXT PAGE key on the CDU as necessary to access the <EICAS MAINT PAGES prompt on the CMC MENU.
(d)
Press the LSK next to the <EICAS MAINT PAGES prompt. Make sure the EICAS MAINTENANCE PAGES menu is displayed.
(e)
Press the NEXT PAGE key on the CDU as necessary to access the <73 ENG EXCD prompt on the EICAS MAINTENANCE PAGES menu.
(f)
Press the LSK next to the <73 ENG EXCD prompt on the EICAS MAINTENANCE PAGES menu. Make sure the EICAS PAGE CONTROL menu is displayed.
