(a)
Borescope, Rigid - 856A1320, CFM International, P.O. Box 15514, Cincinnati, OH 45215
(b)
Borescope, Rigid - 856A1311, CFM International (replacement for 856A1320)
(c)
Light Source - 856A1322, CFM International
(d)
Light Source - 856A1316, CFM International (replacement for 856A1322)
(2)
Borescope Kit - 856A1119G01, G02, G03, G04, G05, or G06, CFM International
NOTE: Borescope Kit 856A1119 can be used as a replacement.
____
B. References
(1) AMM 77-12-01/201, N1 Speed Sensor
C. Access
(1) Location Zones
506 Engine No. 1 - Fan Frame
606 Engine No. 2 - Fan Frame
D. Remove the Guide Tube O-rings For the N1 Speed Sensor
S 864-023-C00
(1) Make sure the start levers are in the CUTOFF position.
(a) Install DO-NOT-OPERATE tags to the start levers.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-33-05
ALL ú ú C01 Page 401 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 864-014-C00 WARNING: DO THE DEACTIVATION PROCEDURE TO PREVENT THE OPERATION OF THE
_______ THRUST REVERSER. THE ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
(2)
Do the deactivation procedure for the thrust reverser for ground maintenance (AMM 78-31-00/201).
S 014-015-C00
(3)
Open the right fan cowl panel (AMM 71-11-02/201).
S 014-016-C00 WARNING: OBEY THE INSTRUCTIONS IN THE PROCEDURE TO OPEN THE THRUST
_______ REVERSER. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT CAN OCCUR.
(4)
Open the right thrust reverser (AMM 78-31-00/201). S 014-005-C00
(5)
Remove the N1 speed sensor from the No. 5 fan frame strut (AMM 77-12-01/201).
S 024-006-C00
(6)
Remove and discard the O-ring from the end of the guide tube. S 034-007-C00
(7)
Remove the bolts that attach the sleeve to the fan frame. S 014-008-C00
(8)
Remove the sleeve from the fan frame. S 024-009-C00
(9)
Remove the guide tube for the N1 speed sensor from the fan frame. S 214-002-C00
(10)
Carefully examine the two O-rings on the guide tube for damage.
(a) Discard the two O-rings.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-33-05
ALL ú ú C01 Page 402 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 214-003-C00
(11) Visually examine the outside of the guide tube and the inside of the strut cavity for a large amount of oil wetting.
NOTE: It is normal to see some oil on the outside of the guide
____ tube and in the cavity, but the outside of the guide tube should not be fully wet with oil.
S 214-004-C00
(12) Make an inspection of the bore of the No. 5 fan frame strut as follows:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 ENGINE 发动机 2(59)
