S 034-009-C00
(5)
Remove the bolts and washers which attach the cover to the fuel control box.
S 034-010-C00
(6)
ENGINES WITH THE FUEL SHUTOFF CABLE WITHOUT THE ADJUSTABLE CLEVIS END; Do these steps to disconnect the push-pull cable for the fuel shutoff from the fuel control box:
(a) Remove the bolt, washer, and nut which attach the clamp links for the fuel shutoff cable to the fuel shutoff lever.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-62-01
ALL ú ú C01 Page 402 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SEE A
GEARBOX ACCESSORY CABLE CLAMPS FUEL SHUTOFF THROTTLE AND GEAR BOX TRANSFER
SEE B BOX FUEL CONTROL
SOLENOID VBV RESET
A
Figure 401 (Sheet 1) Thrust Control Push-Pull Cables Installation
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-62-01
ALL ú ú C01 Page 403 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
THROTTLE CABLE FLIP-LOC CLAMP FUEL CABLE SHUTOFF
SCREW FUEL SHUTOFF CABLE WASHER
CABLE THROTTLE CLAMP LINK (2 LOCATIONS) BOLT
BOLT AND WASHER (2 LOCATIONS) NUT A-A LEVER FUEL SHUTOFF
CLAMP QUICK DISCONNECT FUEL CABLE SHUTOFF BOLT AND WASHER (2 LOCATIONS)
(2 LOCATIONS) SCREW BRACKET SUPPORT BRACKET SUPPORT
R P A 1 LOCKNUT R P B 2
A BOX COVER FUEL CONTROL B FUEL CABLE SHUTOFF
BOX CONTROL FUEL BOLT AND WASHER (2 LOCATIONS) CLEVIS END WASHER
B BOLT
1 ENGINES WITH FUEL SHUTOFF CABLE WITHOUT ADJUSTABLE CLEVIS END NUT B-B SHUTOFF LEVER FUEL
2 ENGINES WITH FUEL SHUTOFF CABLE WITH ADJUSTABLE CLEVIS END
Figure 401 (Sheet 2) Thrust Control Push-Pull Cables Installation
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-62-01
ALL ú ú C01 Page 404 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(b)
Remove the bolts and washers which attach the cable support bracket to the top of the fuel control box.
(c)
Temporarily install the bolt, washer, and nut again on the clamp links for the fuel shutoff cable.
(d)
Temporarily install the bolts and washers again on the top of the fuel control box.
S 034-011-C00
(7) ENGINES WITH THE FUEL SHUTOFF CABLE WITH THE ADJUSTABLE CLEVIS END; Do these steps to disconnect the push-pull cable for the fuel shutoff from the fuel control:
(a)
Remove the bolt, washer and nut which attach the clevis end of the fuel shutoff cable to the fuel shutoff lever.
(b)
Remove the bolts and washers which attach the cable support bracket to the top of the fuel control box.
(c)
Temporarily install the bolt, washer, and nut again on the clevis end of the fuel shutoff cable.
(d)
Temporarily install the bolts and washers again on the top of the fuel control box.
S 434-013-C00
(8) Temporarily install the cover of the fuel control box on the fuel control box.
(a) Use the two bolts and washers.
S 824-014-C00
(9) Attach the push-pull cables away from the TGB.
(a) Do not let the cables touch the TGB when you remove the TGB.
S 034-015-C00
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 ENGINE 发动机 2(123)
