(2)
Access Panels
3701 Stabilizer Trim Access Door
C.
Procedure
S 864-002
(1)
Remove the pressure from rudder hydraulic systems A and B (AMM 27-21-00/201).
S 864-003
(2)
Release the pressure from the hydraulic reservoirs (AMM 29-09-00/201).
S 864-004
(3)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a)
P6-2 panel
1) STABILIZER TRIM ACTUATOR
2) STABILIZER TRIM CONT
(4)
Get access to the tail compartment through access door 3701.
(5)
Close the No. 5 manual shutoff valve.
S 024-007
(6)
Do these steps to remove the pressure reducer (Fig. 401):
(a)
Disconnect the hydraulic lines from the pressure reducer.
(b)
Remove the pressure reducer.
S 014-005
S 864-006
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH A RUDDER PRESSURE REDUCER ú
27-21-96
ú ú 01 Page 401 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
PRESSURE REDUCER
SEE A
HYDRAULIC LINES
SEE B
STA 1104
STA
1104
FWD
A
HYDRAULIC
FWD LINES
PRESSURE
REDUCER
B
Rudder Pressure Reducer Installation
Figure 401
H81879
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH A RUDDER PRESSURE REDUCER ú
27-21-96
ú ú 01 Page 402 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
TASK 27-21-96-404-008
3. Pressure Reducer Installation_____________________________
A. Consumable Materials
(1)
G00062 Fluid - Hydraulic, Fire Resistant, BMS 3-11
(2)
D00054 Lubricant - Assembly, Skydrol, MCS352
B.
References
(1)
AMM 12-12-00/301, Hydraulic Reservoir
(2)
AMM 27-21-00/201, Rudder and Rudder Trim Control System
(3)
AMM 29-09-00/201, Hydraulic Reservoir Pressurization System
C.
Access
(1)
Location Zone
701 Tail Compartment
(2)
Access Panels
3701 Stabilizer Trim Access Door
D.
Procedure
S 424-009
(1)
Install the pressure reducer (Fig. 401):
(a)
Put the pressure reducer in its position.
(b)
Connect the hydraulic lines to the pressure reducer.
S 864-010
(2)
Open the No. 5 manual shutoff valve.
S 714-011
(3)
Do these steps to make sure the pressure reducer is serviceable:
(a)
Pressurize the hydraulic reservoirs (AMM 29-09-00/201).
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL
_______ CONTROL SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. THE AILERONS, RUDDER, ELEVATORS, FLAPS, SLATS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(b)
Supply the pressure to hydraulic systems A and B (AMM 27-21-00/201).
(c)
Move the rudder pedals through their full travel three times and make sure the rudder moves correctly.
(d)
Make sure the pressure reducer does not have a leak.
(4)
Close the access door 3701.
S 414-012
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH A RUDDER PRESSURE REDUCER ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 2(84)
