CABLE GUARD BLOCK
Rudder Rig Pin Locations
Figure 402 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-21-61
ALL ú ú 01 Page 403 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
BUCKLES TURN
BSEE RIG PIN R-5 PIN R-5 RIG
FWD TORQUE TUBE CRANK FOR THE FEEL AND CENTERING MECHANISM
FEEL AND CENTERING MECHANISM
RUDDER AFT CONTROL QUADRANT CONTROL ROD TEMPERATURE `F |5` RB +10/-10 LBS RIG LOAD RA,TABLE I
CABLE RB B RIG PIN R-5 CABLE RA 30 10 -10 -30 -40 0 110 90 70 50 150120 167 158 141 133 124 115 107 102
Figure 402 (Sheet 2) Rudder Rig Pin Location
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-21-61
ALL ú ú 01 Page 404 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
RUDDER
Rudder Deflection Diagram
Figure 403
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-21-61
ALL ú ú 01 Page 405 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
Steering Depressurization Valve
Figure 404
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-21-61
ALL ú ú 02 Page 406 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 034-006
(3)
Remove the nut, washers, and the bolt to disconnect the input rod from the input crank.
S 034-007
(4)
Remove the nuts, washers, and bolts that hold the quadrant to the quadrant shaft.
S 034-008
(5)
Remove the bolts and washers that hold each bearing housing to the structure.
S 024-009
(6)
Remove the left bearing housing from the quadrant shaft.
S 024-010
(7)
Remove the quadrant from the quadrant shaft.
S 024-011
(8)
Remove the quadrant and the quadrant shaft from the airplane.
S 034-012
(9)
Remove the nut and washers from the right side of the quadrant shaft.
S 034-013
(10)
Isolate the washer and the bearing housing from the right side of the quadrant shaft.
TASK 27-21-61-414-014
3. Rudder Aft Quadrant Installation________________________________
A. Special Tools and Equipment
(1) Rig Pin Kit - F70207-93:
---------------------------------------------------------------------| | | DIAMETER | LENGTH | | | REF NO. | F70207-( ) | (INCHES) | (INCHES) | FUNCTION | ---------------------------------------------------------------------| R-3 | -11 | 0.309-0.311 | 6.7 -0.25 | CAPTAINS FORWARD | | | | | | QUADRANT | | R-4 | -11 | 0.309-0.311 | 6.7 -0.25 | FIRST OFFICERS | | | | | | FORWARD QUADRANT | | R-5 | -11 | 0.309-0.311 | 6.7 -0.25 | FEEL AND | | | | | | CENTERING UNIT | ---------------------------------------------------------------------
B. Standard Tools and Equipment
(1) Cable tensiometer -0 to 300 pound range for 1/8 diameter cable
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-21-61
ALL ú ú 01 Page 407 ú Mar 15/95
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 2(57)
