D.
Procedure
S 864-002
(1)
Remove the elevator hydraulic power for systems A and B (AMM 27-31-00/201).
(2)
Open the access doors 3801 or 3802.
S 014-003
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-31-41
ALL ú ú 02 Page 401 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(3) S 014-015Remove the access panels 9107, 9108, and 9109 (for the left side), or 9207, 9208, and 9209 (for the right side).
(4) S 494-004Install the rig pin E-5 in the aft control quadrant.
(5) S 024-006Remove the elevator balance panel (3) (Fig. 402): (a) Remove bolts that attach the bulb seals (2) at the panel (3).
SEE A
PIN E-5 RIG
AFT CONTROL QUADRANT
Figure 401 Rig Pin E-5 Location FWD A
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-31-41
ALL ú ú 02 Page 402 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500
MAINTENANCE MANUAL
SEE A
10. IDLER
HINGE
SEAL 11. ELEVATOR NOSE
9. IDLER HINGE 1. STABILIER
TRAILING
EDGE RIB
8. STABILIZER 2. BULB SEAL
SUPPORT BEAM
3. BALANCE PANEL
7. FLAT SEAL
ELEVATOR (REF)
SEE B 4. AFT MOUNTING
BOLTS
6. HINGE SEAL
5. FORWARD MOUNTING
BOLTS
STABILIZER ACCESS
FWD INBD PANEL (REF)
A
0.05 |0.02
3. BALANCE PANEL
INCH CLEARANCE (2 LOCATIONS)
11. ELEVATOR NOSE
B
Elevator Balance Panel Installation Figure 402
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-31-41
ALL ú ú 01 Page 403 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(b) Remove the bulb seals (2).
CAUTION: THE WEIGHT OF THE BALANCE PANEL CAN CAUSE DAMAGE TO THE
_______
IDLER HINGE SEAL.
(c)
Hold the balance panel to keep the weight off the bolts while you remove them.
(d)
Remove eleven bolts (5) that attach the forward end of the panel (3) to the idler hinge (9).
(e)
Remove six bolts (4) that attach the end of the panel (3) to the elevator nose (11).
NOTE: On some balance panel installations, it is necessary to
____ remove the balance weights to get access to the aft mounting bolts (4).
(f)
Remove the balance panel (3) and the hinge seal (6) from the airplane.
(g)
Remove the screws that attach the flat seals (7) at the idler hinge (9).
(h)
Remove the flat seals (7).
(i)
Remove 15 nuts and bolts that attach the idler hinge (9) to the stabilizer support beam (8).
(j)
Remove the idler hinge (9) and the idler hinge seal (10) from the airplane.
TASK 27-31-41-404-005
3. Elevator Balance Panel Installation (Fig. 402)
___________________________________
A. Special Tools and Equipment
(1) Rig Pin E-5 - 0.309/0.311-inch diameter, 6.7 |0.25 inches long (MS20392-4)
NOTE: The rig pin is part of the rig pin kit F70207-69, -78 or -83.
____
B. Standard Tools and Equipment
(1)
Scale - 0-6 inches, in tenths and hundredths of an inch increments
C.
References
(1)
AMM 27-31-00/201, Elevator and Tab Control System
(2) 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:737-300 400 500 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 2(167)