(4)
AIPC 32-14-06
(5)
AIPC 53-43-63 Fig. 1
B.
Access
(1)
Location Zone 752 Body Landing Gear Door, Aft Outboard, LH 762 Body Landing Gear Door, Aft Outboard, RH
C.
Procedure
S 864-011
WARNING: YOU MUST CAREFULLY INSTALL THE GROUND LOCKS IN ALL LANDING
_______ GEAR. AN ACCIDENTAL RETRACTION OF THE LANDING GEAR CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) Install the ground locks in all landing gear (AMM 09-11-00/201).
S 494-012
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(2)
Do this task: "Installation of the Door Locks on the Wing Landing Gear" (AMM 32-00-30/201).
S 494-013
(3)
Do this task: "Installation of the Door Locks on the Body Landing Gear" (AMM 32-00-30/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-14-06
ALL ú ú 03 Page 401 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
1. BOLT
5. BONDING 2. WASHER
JUMPER
3. BOLT
SEE A
8. WASHER FWD
7. BOLT
11. WASHER
10. NUT
4. WASHER
6. OUTBOARD DOOR
9. COTTER
B
PIN
6. OUTBOARD DOOR
12.
BUSHING
13.
SPACER
14.
WASHER SEE B
17. NUT (3 LOCATIONS) 16. WASHER
A
18. BUSHING
A
15. BOLT LINKAGE ROD
FWD
A
A-A
Outboard Door Installation of the Shock Strut for the Body Landing Gear Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-14-06
ALL ú ú 01 Page 402 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
S 224-004
(4) Measure and get the accurate length of the linkage rod, if it is not
damaged.
NOTE: You use the dimension in the door adjustment of the shock
____ strut for the body landing gear (AMM 32-14-00/501).
S 024-005
(5)
Remove the outboard door.
(a)
Remove the bolt (15) and pull the linkage rod from the door (6).
(b)
Remove the bolts (1 and 7) to remove the bonding jumper (5).
(c)
Hold the door (6), remove the hinge bolts (3) and remove the doors.
TASK 32-14-06-404-006
3. Body Gear Shock Strut Outboard Door Installation
_________________________________________________
A. Consumable Materials
(1)
D00633 Grease - BMS 3-33 (preferred)
(2)
D00013 Grease - MIL-G-23827 (optional)
B.
Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 1 | Bolt | 32-14-06 | 02 | 415 | | | 2 | Washer | 32-14-06 | 01 | 175 | | | 3 | Bolt | | | 190 | | | 4 | Washer | | | 195 | | | 5 | Bonding Jumper | | | 180 | | | 6 | Outboard Door (LH) | | | 210 | | | 6 | Outboard Door (RH) | | | 215 | | | 7 | Bolt | 53-43-63 | 01 | 275 | | | 8 | Washer | 32-14-06 | 01 | 175 | | | 9 | Cotter Pin | | | 185 | | | 10 | Nut | | | 205 | | | 11 | Washer | | | 200 | | | 12 | Bushing | | | 15 | | | 13 | Spacer | | | 20 | | | 14 | Washer | | | 25 | | | 15 | Bolt | | | 10 | | | 16 | Washer | | | 30 | | | 17 | Nut | | | 35 | | | 18 | Bushing | | | 65 | 2......…........…...................................…..........…......…........1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 起落架 LANDING GEAR 3(94)
