(2)
AMM 09-11-00/201, Towing
(3)
AMM 12-21-01/301, Landing Gear
(4)
AMM 32-00-30/201, Landing Gear Door Locks
(5)
AMM 32-21-05/601, Nose Gear Tripod Brace Assembly
(6)
AMM 32-21-07/401, Nose Gear Bull Nose Assembly
(7)
AMM 33-42-03/201, Nose Gear Runway Turnoff Lights
(8)
AIPC 32-21-05 Fig. 1
(9)
AIPC 32-61-58 Fig. 1,
D.
Access
(1)
Location Zone
715 Nose Landing Gear
E.
Prepare to install the tripod brace assembly.
S 114-013
(1) Clean the pin assembly of the tripod braces and its mating surfaces, and the attach lugs of the shock strut with naphtha.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-21-05
ALL ú ú 01 Page 405 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
TANG WASHER
LOCKBOLT SEE A
SPECIAL NUT
SEE B O-RING
UPPER
UPPER TRIPOD LUBE
TRIPOD BOLT INSERT
BRACE
SHOCK
STRUT
A
FWD
DRAG
STRUT
UPPER
TRIPOD
BRACE
LOCKBOLT
SPECIAL NUT
TRIPOD
APEX BOLT
0-RING
TANG
WASHER
LUBE
INSERT
LOWER TRIPOD BRACE
B
Nose Gear Upper Tripod Brace Installation
Figure 403
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-21-05
ALL ú ú 01 Page 406 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 224-014
(2)
Examine the pin assemblies of the tripod brace and its mating surfaces for permitted wear limits (AMM 32-21-05/601).
S 434-015
(3)
Assemble the lube inserts.
(a)
Examine the O-rings on the lube insert for worn parts and damage and replace if it is necessary.
(b)
Apply a large quantity layer of grease on O-rings, lube inserts, and inner surfaces of the bolts.
(c)
Move the O-rings to the lube inserts and lubricate the insert if it is necessary.
(d)
Move the lube inserts to the bolts to make the pin assembly and align the hole for the lockbolt.
F.
Install the tripod brace assembly.
S 424-016
(1)
Install the upper tripod brace.
(a)
Lubricate the upper tripod pin, the threads, the bushing surfaces and the washer with grease.
(b)
Set the upper tripod brace for the installation on the attach lug of the shock strut.
(c)
Insert the pin assembly of the upper tripod (Fig. 402).
(d)
Install the tang washer and the special nut. 1) Tighten the special nut 50 - 70 pound feet lube torque. 2) If it is necessary, loosen the nut to the nearest
castellation to align the lockbolt when you install.
(e)
Install the lockbolt through the special nut and the lube insert. 1) Install the nut on the lockbolt and tighten.
(f)
Apply a tamper-proof putty to the lockbolt nut until the movement of the nut will cause the seal to break.
(g)
Lubricate the fittings with grease.
S 424-017
(2)
Install the brace assembly of the lower tripod.
(a)
Lubricate the pin, the threads, the washer and the bushing surfaces with grease.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-21-05
ALL ú ú 01 Page 407 ú Oct 18/99
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 起落架 LANDING GEAR 3(145)
