25-57-03
ALL ú ú 01 Page 410 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
FWDFWD
B-BA-A
NOTE: ONLY THE SILL ROLLER SUPPORT IS SHOWN, THE REST OF THE SILL ASSEMBLY IS NOT SHOWN FOR CLARITY.
DOOR LATCH SHIMS
INBD
C-C
THE CLEARANCE MUST BE 0.000 INCH FOR AT LEAST ONE SILL ROLLER SUPPORT ON EACH OUTBOARD SILL ASSEMBLY. THE CLEARANCE MUST BE LESS THAN 0.020 INCH FOR THE REMAINING SILL ROLLER SUPPORTS
Retractable Side Door Sill Roller/Caster Guide Assembly Installation
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-57-03
ALL ú ú 01 Page 411 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
CASTER AND ROLLER TRAYS - REMOVAL/INSTALLATION
______________________________________________
1. General
_______
A. This procedure has two tasks. The first task gives instructions to remove the caster trays and roller trays. The second task gives instructions to install the caster trays and roller trays.
TASK 25-57-04-004-001
2. Caster and Roller Trays Removal (Fig. 401)
_______________________________
A. Access
(1) Location Zone
210 Main Deck
B. Remove the Caster and Roller Trays
S 034-002
(1) Turn the T-bolt fasteners a quarter turn.
NOTE: The groove in the top of the T-bolt fastener must point
____
laterally.
S 024-003
(2) Remove the tray from the floor fittings.
C. Remove a Caster
S 034-012
(1)
Remove the four nuts, washers, and bolts.
S 024-013
(2)
Remove the caster.
D. Remove a Roller
S 034-014
(1)
Remove the nut, washer, and bolt.
(2)
Remove the roller.
S 024-015
TASK 25-57-04-404-005
3. Caster and Roller Trays Installation (Fig. 401)
____________________________________
A. Access
(1) Location Zone
210 Main Deck
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-57-04
ALL ú ú 06 Page 401 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
CASTER
LOW DENSITY
CASTER TRAY HIGH DENSITY
CASTER TRAY
NUT
WASHER
BOLT
"T" BOLT
(EXAMPLE)
FLOOR
FITTINGS
(EXAMPLE)
CASTER TRAY
A
Caster/Roller Tray Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-57-04
ALL ú ú 05 Page 402 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
C25412
A
747-400
MAINTENANCE MANUAL
ALL BOLTS SHOULD BE INSTALLED THE SAME WAY ON ANY GIVEN ROLLER TRAY
Caster/Roller Tray Installation Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-57-04
ALL ú ú 01 Page 403 ú Feb 10/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
B. Install a Roller
S 424-006
(1)
Put the roller in its position in the tray.
S 434-016
(2)
Install the bolt, washer, and nut.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 2(85)
