(b)
Make sure the latch release lever locks the bumper in the extended (vertical) position.
K. Lock/Stop Roller-Caster Trays Operation Check
S 715-035
(1) Push the pin in the head of the roller shaft and withdraw the shaft to remove the roller from the tray.
(a) Make sure the roller shaft withdraws smoothly.
S 715-036
(2) Install the roller shaft through the holes in the tray until the roller locks in the tray.
(a) Make sure all rollers turn smoothly and freely.
S 715-093
(3)
Operate each caster shear plunger lever to retract the retaining pins that hold the caster in the tray.
(a) Make sure the caster is free to move forward and aft and lift out of the tray.
(4)
Install and align the caster in the tray.
S 715-094
(5)
Operate each caster shear plunger lever to extend the retaining pins through the holes in the tray.
(a)
Make sure the retaining pins lock the caster in the tray.
(b)
Make sure all casters turn smoothly and freely.
S 715-038
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-58-00
ALL ú ú 04A Page 509 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
L. Retractable End Locks Operation Check
S 715-042
(1) Operate the release lever for the tray locking pins at each end of the end lock to retract the retaining pins.
(a)
Make sure the retaining pins release from the tray.
(b)
Make sure the end lock is free to move forward and aft and lift out of the tray.
S 715-043
(2) Install and align the end lock in the tray.
(a)
Operate the release levers for the tray locking pins to extend the retaining pins through the holes in the tray.
(b)
Make sure the retaining pins engage the holes in the tray and the end lock is locked in the tray.
S 715-044
(3)
Make sure the rollers turn smoothly and freely.
S 715-045
(4)
Lift and move the lockhead restraint release lever in the forward-aft direction until the restraint lifts and locks in the extended (vertical) position.
(a) Make sure the restraint lifts and locks smoothly.
S 715-046
(5) Lift and move the release lever below the lockhead restraint in the forward-aft direction until the restraint unlocks and lowers to the retracted (horizontal) position.
(a) Make sure the restraint unlocks and lowers smoothly.
M. Retractable End Stops Operation Check
S 715-095
(1) Operate the release lever for the tray locking pins to retract the retaining pins.
(a)
Make sure the retaining pins release from the tray.
(b)
Make sure the end stop is free to move forward and aft and lift out of the tray.
S 715-096
(2) Install and align the end stop in the tray.
(a)
Operate the release levers for the tray locking pins to extend the retaining pins through the holes in the tray.
(b)
Make sure the retaining pins engage the holes in the tray and the end stop is locked in the tray.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-58-00
ALL ú ú 04A Page 510 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 715-049
(3)
Make sure the roller turns smoothly and freely.
S 715-097
(4)
Lift and move the stophead restraint release lever in the forward-aft direction until the restraint lifts and locks in the extended (vertical) position.
(a) Make sure the restraint lifts and locks smoothly.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 2(113)
