747-400 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 2(16)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 6.  Side Guide Rails
________________
 A.  Guide rails are installed between the side guides on each side of the compartment. The rails help the longitudinal movement of containers and pallets into and out of the compartment interior. The rails also prevent the lateral and vertical movement of containers and pallets.
 7.  Splitter Rails
______________
 A.  Retractable splitter rails, two in the forward compartment and one in the aft compartment, are located on the airplane centerline. The forward compartment splitter rails are located at the forward and aft ends of the ball transfer panel: the aft compartment rail is at the forward end of the ball transfer panel. These rails, when extended, separate and position half-width containers moving longitudinally into the container compartments. If full-width containers are used, the splitter rails are lowered to the spring-loaded retracted position.
 8.  End Stops
_________
 A.  Four fixed end stops are located at each end of the forward compartment and at the forward end of the aft compartment to provide longitudinal and vertical restraint. The door area of the aft compartment is so located that the aft edge of the ball transfer panel forms the aft edge of the compartment. Five fixed end stop/guides are located immediately aft of the ball transfer panel. These stops act as guides for containers moving laterally into and out of the container compartment, act as longitudinal restraints for containers positioned in the compartment, and act as end stops for containers being moved in an aft direction within the compartment.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-54-00
 ALL  ú ú 13 Page 2 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 9.  Container Stops
_______________
 A.  Retractable container stops are provided for use when carrying mixed loads of containers and pallets in either containerized cargo compartment. The stops can be stowed in specified locations and must remain retracted when not in use. Quick-release attachment fittings secure the stops to the cargo tracks at any required location when in use.
 10. Pallet Locks
____________
 A.  Manually retractable pallet locks are provided for use when carrying pallets in either containerized cargo compartment. The locks can be positioned at marked locations and must remain retracted when not in use. Retractable locking heads provide longitudinal restraint, vertical restraint and longitudinal separation of the pallets and adjacent containers. Quick-release attachment fittings secure the locks to the cargo tracks. The locks are installed at marked locations to achieve the container/pallet option configuration.
 B.  Make sure the arrow on the pallet lock points in the same direction as the arrow on the cargo floor.
 11. Operation
_________
 A.  Functional Description
 (1)  
The containerized cargo restraining system provides the guides and restraining devices used to load, transport or unload cargo. Positioning of the restraining devices, either retracted or extended is dictated by the type of cargo package to be handled.

 (2)  
When the system is configured for half-width containers the splitter rails and the center guides on the airplane centerline are extended. The retractable doorway center guides are retracted and the semiautomatic retractable doorsill restraints have the vertical restraint retracted and the stop guide erected. The handling system moves each container laterally into the doorway until the container contacts the side guides opposite the doorway, then longitudinally. As the containers move longitudinally into the compartment, the splitter rail separates them for alignment with the extended center guides and the side guides. The center and side guides control lateral movement of the containers during longitudinal travel until contact is made with the fixed end stops or a previously loaded container. When the left half of the doorway has been loaded, the doorway center guides are extended. The right half is then loaded and the doorsill vertical restraints are extended.

 B.  Control
 (1)  General
 (a)  Doorsill restraints, center guides, splitter rails, side guides, pallet locks and container stops must be extended or retracted as required for the various types of cargo handling operations. All of the guides are manually operated.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 2(16)