• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-09 10:31来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (1)  TRANSPORT ROLLERS ATTACHED WITH CAP HEAD SELF-LOCKING SCREWS; Remove the two screws and remove the transport roller from the roller tray.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-53-24
 ALL  ú ú 02 Page 401 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

AFT CARGO 
COMPARTMENT 
FORWARD CARGO  SEE  B 
COMPARTMENT 
SEE  A 
TRANSPORT ROLLER 
FORWARD CARGO  AND TRAY 
COMPARTMENT  BRAKE ROLLER 
DOORWAY  (REF)  SEE  C 

FWD 
FORWARD CARGO COMPARTMENT 
CSEE AND TRAY TRANSPORT ROLLER  A  AFT CARGO DOORWAY COMPARTMENT 

(REF) BRAKE ROLLER  FWD  B AFT CARGO COMPARTMENT 
Transport Roller Installation Figure 401 (Sheet 1) 

L51753
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-53-24
 ALL  ú ú 02 Page 402 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

TRANSPORT ROLLER WITH

TRANSPORT ROLLER AND TRAY
(EXAMPLE)


Transport Roller Installation
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-53-24
 ALL  ú ú 02 Page 403 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L51916
A
747-400
MAINTENANCE MANUAL

 S 024-008
 (2)  TRANSPORT ROLLERS RETAINED WITH A HI-LOK NUT;
 Do the steps that follow:

 (a)  
Remove the collar from the shaft. Discard the collar.

 (b)  
Disengage the shaft sideways from the roller tray.

 (c)  
Remove the transport roller.


 TASK 25-53-24-404-010
 3. Transport Roller Installation (Fig. 401)
_____________________________
 A. Special Tools and Equipment
 (1)  3PRE65B00040, Lower Cargo Door Opening Safety Barrier
 B. References
 (1)  
AMM 24-22-00/201, Manual Control

 (2)  
AMM 52-34-00/001, Forward/Aft Cargo Doors

 (3)  
AIPC 25-53-16


 C. Access
 (1)  Location Zone
 100 Lower Half of Fuselage

 D. Procedure
 S 424-011
 (1)
Place the transport roller in position on the roller tray.

 S 424-020

 (2)  
TRANSPORT ROLLERS ATTACHED WITH CAP HEAD SELF-LOCKING SCREWS; Do the steps that follow:

 (a)  
Secure the transport roller with the two screws.

 (b)  
Tighten the screws using an Allan key.

 


 S 424-012
 (3)  TRANSPORT ROLLERS RETAINED BY A HI-LOK NUT;
 Do the steps that follow:

 (a)  
Move the shaft through the applicable holes in the roller tray and transport roller.

 (b)  
Fit a new collar on the shaft and tighten.


 S 714-015
 (4)  Make sure the transport roller rotates freely in both directions.
 E. Put the Airplane Back to Its Usual Condition
 S 414-022
 (1)  
Remove the safety barrier (3PRE65B00040) from the opening of the cargo compartment if it is not necessary.

 (2)  
Close the cargo compartment door (AMM 52-34-00/001).


 S 414-017
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-53-24
 ALL  ú ú 02 Page 404 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 2(14)