(b)
Remove the main oil/fuel heat exchanger.
(c)
Remove the seal gasket from the mounting flange.
1) Examine the gasket for damage to the sealing surface.
2) Replace the gasket if it is damaged.
(27)
Put protective caps on all the open ports.
S 494-067-C00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-01
ALL ú ú C02 Page 432 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
TASK 73-11-01-424-038-C00
3. Fuel Pump Package Installation______________________________
A. Equipment
(1)
Hoist - Strut-Mounted Nose Cowl Boom
(T/R and Cowling Handling Equipment C71002-1)
(2)
Respirator - local purchase
(3)
Sling - Fuel Pump and MEC R/I, 856A3598G02
(856A3598G01 is superseded by 856A3598G02),
CFM International, P.O. Box 15514,
Cincinnati, OH 45215
(4)
3/4 inch drive - local resource
B. Consumable Materials
(1)
Oil - Lubricating, MIL-L-6081 Grade 1010 (CP2369), local purchase
(2)
Grease - Graphite (CP2101) (AMM 70-10-01/201)
(3)
Methyl Ethyl Ketone (MEK) (CP1040) - local purchase
(4)
Petrolatum - Pure Mineral (CP2102), local purchase
(5)
DOO599, 0il, (CP2442) engine - CFMI SB 79-0011
C. References
(1)
AMM 12-13-11/301, Engine Oil
(2)
AMM 71-00-00/501, Power Plant
(3)
AMM 71-11-02/201, Fan Cowl Panel
(4)
AMM 76-11-08/401, Fuel Control Box
(5)
AMM 78-31-00/201, Thrust Reverser System
D. Access
(1)
Location Zones
506 Engine No. 1 - Top end of accessory gearbox
606 Engine No. 2 - Top end of accessory gearbox
(2)
Access Panels
5746L Engine No. 1 - Left Fan Cowl Panel
5846R Engine No. 2 - Left Fan Cowl Panel
E. Procedure
S 424-068-C00
CAUTION:_______REPLACE THE SEAL GASKETS IF THEY ARE DAMAGED. USE OF THE SAME GASKET IS NOT RECOMMENDED. USE NEW O-RINGS WHEN YOU INSTALL THE FITTINGS IN THE MEC. DAMAGED SEAL GASKETS AND USED O-RINGS CAN CAUSE OIL AND/OR FUEL LEAKAGE.
USE TWO WRENCHES TO INSTALL THE TUBE COUPLING NUTS, ONE TO HOLD THE FITTING AND ONE TO TIGHTEN THE COUPLING NUT. THIS WILL PREVENT DAMAGE TO THE HARDWARE.
(1) If it is necessary, do the steps that follow to install the main oil/fuel heat exchanger on the fuel pump:
(a) Make sure that the mating surfaces are clean and are not damaged.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-01
ALL ú ú C01 Page 433 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
WARNING: DO NOT GET METHYL ETHYL KETONE (MEK) IN YOUR MOUTH,
_______ OR EYES, OR ON YOUR SKIN. DO NOT BREATHE THE FUMES FROM MEK. PUT ON A RESPIRATOR, PROTECTIVE SPLASH GOGGLES, AND GLOVES WHEN YOU USE MEK. KEEP MEK AWAY FROM SPARKS, FLAME, AND HEAT. MEK IS A POISONOUS AND FLAMMABLE SOLVENT WHICH CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
1) If it is necessary, clean the surfaces with MEK and wipe it dry.
CAUTION: USE OF THE OLD MAIN OIL/FUEL HEAT EXCHANGER/FUEL PUMP
_______ GASKET IS NOT RECOMMENDED. POSSIBLE FUEL LEAKS CAN OCCUR.
(b) Install the gasket on the fuel pump as follows:
1) Examine and replace the seal gasket if it is damaged (AMM 70-30-01/201).
WARNING:_______DO NOT LET ENGINE OIL STAY ON YOUR SKIN. USE ENGINE OIL IN AREA WITH GOOD VENTILATION. ENGINE OIL IS POISONOUS AND CAN BE ABSORBED THROUGH YOUR SKIN. ENGINE OIL FUMES CAN IRRITATE YOUR RESPIRATORY TRACT.
2) Apply a thin layer of engine oil to the gasket seal.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 发动机燃油和控制(18)
