(i)
Push the control column forward until the stabilizer trim operates.
(j)
Make sure the BIT 1 light on the portable tester comes on.
(k)
Put the control column in the neutral position.
(l)
Make sure the BIT 1 light on the portable tester goes out.
S 865-619
(3) If you will do no more tests, then do this task:
"Put the Airplane to its Usual Condition."
TASK 31-24-01-735-620
48. Stab Trim Switch Signal Test
____________________________
A. Access
(1) Location Zones
101 Control Cabin - Left
102 Control Cabin - Right
B. Procedure
S 865-621
(1) Make sure you did the Prepare For Input Parameter Test task.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. BEJ 113 ú
31-24-01
ú ú 23B Page 561 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 735-622
(2) Do this test of the signals from the stab trim switch:
(a)
Set the portable tester to SUBRAME 0, WORD 25.
(b)
Make sure the trim switches on the control wheel are in the neutral position.
(c)
Make sure the BIT 2 light on the portable tester is off.
(d)
Set the trim switch on the captain's control wheel to the TRIM NOSE UP position.
(e)
Make sure the BIT 2 light on the portable tester is on.
(f)
Set the trim switch on the captain's control wheel to the neutral position.
(g)
Make sure the BIT 2 light on the portable tester goes out.
(h)
Set the trim switch on the captain's control wheel to the TRIM NOSE DN position.
(i)
Make sure the BIT 1 light on the portable tester is on.
(j)
Set the trim switch on the captain's control wheel to the neutral position.
(k)
Make sure the BIT 1 light on the portable tester goes out.
S 735-623
(3)
Do the test again on the first officer's control wheel.
S 865-624
(4)
If you will do no more tests, then do this task:
"Put the Airplane to its Usual Condition."
TASK 31-24-01-735-625
49. Stick Shaker Signals Test
_________________________
A. Access
(1) Location Zones
101 Control Cabin - Left
102 Control Cabin - Right
B. Procedure
S 865-626
(1)
Make sure you did the Prepare For Input Parameter Test task.
S 735-627
(2)
Do this test of the stick shaker signals:
(a)
Set the portable tester to SUBFRAME 0, WORD 28.
(b)
Make sure the BIT 2 light on the portable tester is off.
(c)
Push the STALL WARNING TEST NO. 1 button on the stall warning module.
(d)
Make sure the BIT 2 light on the portable tester comes on.
(e)
Release the STALL WARNING TEST NO. 1 button.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. BEJ 113 ú
31-24-01
ú ú 38B Page 562 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(f)
Make sure the BIT 2 light on the portable tester is off.
(g)
Push the STALL WARNING TEST NO. 2 button.
(h)
Make sure the BIT 1 light on the portable tester comes on.
(i)
Release the STALL WARNING TEST NO. 2 button.
(j)
Make sure BIT 1 light of the portable tester is off.
S 865-628
(3) If you will do no more tests, then do this task:
"Put the Airplane to its Usual Condition."
TASK 31-24-01-735-629
50. Thrust Reverser Position Signals Test_____________________________________
A. Reference
(1) AMM 78-31-00/501, Thrust Reverser System
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 仪表 INSTRUMENTS(52)
