(a)
Set the portable tester to SUBFRAME 3, WORD 31.
(b)
Make sure the BIT 4 light on the portable tester is on.
S 735-034
(3) Do this EIS input configuration test.
(a)
Set the portable tester to SUBFRAME 3, WORD 31.
(b)
Make sure the BIT 3 light on the portable tester is on.
S 735-035
(4) Do this dataframe test.
(a)
Set the portable tester to SUBFRAME 3, WORD 31.
(b)
Make sure the BIT 5 light on the portable tester is off.
S 735-036
(5) Do this DME Source test.
(a)
Set the portable tester to SUBFRAME 3, WORD 31.
(b)
Make sure the BIT 6 light on the portable tester is off.
S 735-037
(6) Do this configuration discrete test.
(a)
Set the portable tester to SUBFRAME 3, WORD 31.
(b)
Make sure the BIT 2 light on the portable tester is off.
TASK 31-24-01-735-038
4. System Test - Flight Recorder System____________________________________
A. General
(1) The system test has procedures to do tests of all the inputs to the flight data recorder system. You can do the tests out of sequence. You can do each test independently.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. BEJ 113 ú
31-24-01
ú ú 23B Page 505 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(2)
The tests in this procedure are written to the standard BOEING application software. If customized software is installed, part of the test may not look the same. Installation of the BOEING application software may be necessary.
(3)
These tasks use the word SUBFRAME 0 to make a selection of a parameter which is on all four subframes. Some portable testers do not have a switch position for subframe 0. On these test sets, make a selection of subframes 1 thru 4 when the task uses subframe 0.
B. References
(1) AMM 24-22-00/201, Manual Control
C. Access
(1) Location Zones
101 Control Cabin - Left
102 Control Cabin - Right
D. Procedure
S 865-053
(1)
Do this task: Prepare for Input Parameters Test
S 735-058
(2)
Do this task: Acceleration Signals Test
S 735-059
(3)
Do this task: Aileron Position Signals Test
(4)
Do this task: Brake Pressure Signals Test
(5)
Do this task: Control Column Position Signals Test
(6)
Do this task: Control Wheel Position Signals Test
(7)
Do this task: Elevator Position Signals Test
S 735-060
S 735-061
S 735-062
S 735-063
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. BEJ 113 ú
31-24-01
ú ú 46B Page 506 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 735-072
(8) Do this task: Rudder Pedal Position Signals Test
S 735-073
(9) Do this task: Rudder Position Signals Test
S 735-074
(10) Do this task: Speed Brake Handle Position Signals Test
S 735-075
(11) Do this task: Stabilizer Position Signals Test
S 735-076
(12) Do this task: Airborne Vibration Monitor Signals Test
S 735-077
(13) Do this task: Autothrottle Digital Bus Signals Test
S 735-078
(14) Do this task: Clock Signals Test
S 735-079
(15) Do this task: DAA Digital Bus Signals Test
S 735-080
(16) Do this task: DADC Digital Bus Signals Test
S 735-084
(17) Do this task: EFIS Control Panel Digital Bus Signals Test
S 735-085
(18) Do this task: EFIS Digital Bus Signals Test
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 仪表 INSTRUMENTS(26)
