TASK 31-24-01-735-382
22. EFIS Bus Signals Test_____________________
A. Access
(1) Location Zones
101 Control Cabin - Left
102 Control Cabin - Right
B. Procedure
S 865-383
(1)
Make sure you did the Prepare For Input Parameter Test task.
S 735-385
(2)
Do this test of the EFIS bus signals.
(a)
Make sure the EFIS transfer switch is in the NORM position.
(b)
Make sure the IRS transfer switch is in the NORM position.
(c)
Set the portable tester to SUBFRAME 0, WORD 15.
(d)
Set the SYS DSPL switch on the ISDU to the L position.
(e)
Hold the DSPL SEL switch on the ISDU to the TEST position for more than 10 seconds.
(f)
Make sure the portable tester display is 0224 to 0301.
(g)
Set the portable tester to SUBFRAME 0, WORD 8.
(h)
Set the SYS DSPL switch to the R position.
(i)
Set the EFIS transfer switch to the BOTH-ON-2 position.
(j)
Hold the DSPL SEL switch in the TEST position for more than 10 seconds.
(k)
Make sure the portable tester display is 0744 to 1034.
S 865-387
(3) If you will do no more tests, then do this task:
"Put the Airplane to its Usual Condition."
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. BEJ 113 ú
31-24-01
ú ú 05B Page 532 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TASK 31-24-01-735-388
23. EIS Digital Bus Signals Test____________________________
A. Access
(1) Location Zones
101 Control Cabin - Left
102 Control Cabin - Right
B. Procedure
S 865-389
(1)
Make sure you did the Prepare For Input Parameter Test task.
S 735-390
(2)
Do this test of the signals from the EIS.
(a)
Do this test of the N1 signals: 1) Set the portable tester to SUBFRAME 0, WORD 7. 2) Push and hold the EIS PRIMARY BITE button. 3) Let the EIS display become stable. 4) Make sure the EIS shows an N1 of 106%. 5) Make sure the portable tester display is 6470 to 6513. 6) Release the EIS PRIMARY BITE button.
(b)
Do this test of the oil pressure signals: 1) Set the portable tester to SUBFRAME 1, WORD 5. 2) Push and hold the EIS SECONDARY BITE button. 3) Make sure the left oil pressure shows 13 psi. 4) Make sure the portable tester display shows 0054 to 0076. 5) Set the portable tester to SUBFRAME 3, WORD 5. 6) Make sure the right oil pressure shows 13 psi. 7) Make sure the portable tester display shows 0054 to 0076. 8) Release the EIS SECONDARY BITE button.
S 865-391
(3) If you will do no more tests, then do this task:
"Put the Airplane to its Usual Condition."
TASK 31-24-01-735-392
24. FCC Bus Signals Test____________________
A. Reference
(1) AMM 22-11-01/501, Digital Flight Control System
B. Access
(1) Location Zones
101 Control Cabin - Left
102 Control Cabin - Right
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. BEJ 113 ú
31-24-01
ú ú 14B Page 533 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
C. Procedure
S 865-393
(1)
Make sure you did the Prepare For Input Parameter Test task.
S 735-394
(2)
Do this test of the FCC bus signals.
(a)
Make sure the autopilot system is serviceable (AMM 22-11-01/501).
(b)
Set the portable tester to SUBFRAME 1, WORD 14.
(c)
Set the trailing edge flaps to the 2° position.
(d)
Make sure the portable tester display is 0000 to 0266.
(e)
Set the portable tester to SUBFRAME 2, WORD 14.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 仪表 INSTRUMENTS(38)
