(2)
The installation of the outboard door on the wheel well of the wing landing gear.
TASK 32-12-01-004-001
2. The Outboard Door Removal on the Wheel Well of the Wing Landing Gear____________________________________________________________________ (Fig. 401)
A. Special Tools and Equipment
(1)
OHME65B10910 - Sling Assembly
B.
References
(1)
09-11-00/201, Towing
(2)
32-00-30/201, Landing Gear Door Locks
(3)
32-12-00/501, Wing Gear Wheel Well Outboard Door
(4)
IPC 32-12-01 Fig. 2, IPC 32-12-08 Fig. 1
C.
Access
(1)
Location Zone
732 Wing Landing Gear Door, LH
742 Wing Landing Gear Door, RH
D.
Prepare for the Removal
(1)
Install the ground locks in all landing gear (Ref 09-11-00/201).
S 864-020
S 494-021
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(2) Do this task: "Installation of the Door Locks on the Wing Landing Gear" (Ref 32-00-30/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-12-01
ALL ú ú 01 Page 401 ú Oct 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
RADIUS ROD
SEE C
STRIKE BOARD WING GEAR WHEEL WELL INBOARD DOOR
WING GEAR WHEEL SEE C WELL OUTBOARD DOOR
SEE B FWD
SEE A
WING GEAR WHEEL WELL INBOARD DOOR WING GEAR WHEEL WELL INBOARD DOOR
HINGE
HINGE
BONDING BONDING JUMPER JUMPER
WING GEAR WHEEL WING GEAR WHEEL WELL OUTBOARD DOOR WELL OUTBOARD DOOR
FWD
FWD
A B
Wing Gear Wheel Well Outboard Door Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-12-01
ALL ú ú 01 Page 402 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
Wing Gear Wheel Well Outboard Door Installation
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-12-01
ALL ú ú 01 Page 403 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 494-023
(3)
Do this task: "Installation of the Door Locks on the Body Landing Gear" (Ref 32-00-30/201).
E.
Remove the Outboard Door on the Wheel Well
S 494-004
(1)
Hold the door.
S 034-005
(2)
Disconnect the two radius rods.
S 034-006
(3)
Disconnect the bonding jumpers from the outboard door.
S 494-007
(4)
Hold the door with the sling assembly.
S 034-008
(5)
Remove the hinge bolts on the outboard door of the wheel well.
S 024-009
(6)
Remove the outboard door on the wheel well.
TASK 32-12-01-404-010
3. The Outboard Door Installation on the Wheel Well of the Wing Landing Gear_________________________________________________________________________ Fig. 401
A. Special Tools and Equipment
(1)
OHME65B10910 - Sling Assembly
B.
References
(1)
12-21-01/301, Landing Gear
(2)
32-00-30/201, Landing Gear Door Locks
(3)
32-12-00/501, Wing Gear Wheel Well Outboard Door
(4)
32-12-01/601, Wing Gear Wheel Well Outboard Door
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 起落架 LANDING GEAR 2(95)
