EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-28
ALL ú ú 01 Page 403 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(3) S 434-009Install the bolt (1), the washers (2 and 4), the shim (3), and the nut (5) through the shock strut lugs and the door actuator rod. (a) Temporarily, tighten the nut by hand.
(4) S 424-010Connect the door fitting to the actuator rod and install the bolt (17), the washers (15 and 16), the shim (18), and the nut (14). (a) Temporarily, tighten the nut by hand.
(5) S 434-011Install the bolt (13), the washers (11 and 12), and the nut (10) through the door fitting and the shock strut lugs. (a) Tighten the nut (10) from 660 to 780 pound-inches.
(6) S 434-012Install the bolt (6), the washers (7 and 9), the shim (8), and the nut (10).
NOTE:____ The maximum clearance between the bushings of the door fitting and the shock strut lug is 0.003 inch.
(a) (b) If it is necessary, add a shim to get the maximum clearance of 0.003 inch.Tighten the nut from 660 to 780 pound-inches.
(7) S 434-013Tighten the nut (14) 290 to 410 pound-inches.
NOTE:____ The maximum clearance between the bushings of the door fitting and the actuator rod is 0.003 inch.
(a) If it is necessary, add a shim to get the maximum clearance of 0.003 inch.
(8) S 434-014Tighten the nut (5) 660 to 780 pound-inches.
NOTE:____ The maximum clearance between the bushings of the actuator rod and the shock strut lug is 0.003 inch.
(a) If it is necessary, add a shim to get the maximum clearance of 0.003 inch.
(9) S 824-015Do a check on the outboard door fairing of the shock strut and adjust if it is necessary (Ref 32-12-00/501).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-28
ALL ú ú 01 Page 404 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 094-024
WARNING:_______ YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO REMOVE THE
DOOR LOCKS FROM THE LANDING GEAR DOORS. THE DOORS CAN CLOSE
QUICKLY IF YOU DO NOT REMOVE THE DOOR LOCKS CORRECTLY. THIS
CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(10)
Do this task: "Removal of the Door Locks from the Wing Landing Gear" (Ref 32-00-30/201).
S 094-023
(11)
Do this task: "Removal of the Door Locks from the Body Landing Gear" (Ref 32-00-30/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-28
ALL ú ú 01 Page 405 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
WING LANDING GEAR TRUCK POSITIONING ACTUATOR RELIEF VALVE -
___________________________________________________________ REMOVAL/INSTALLATION
____________________
1. General_______
A. This procedure contains two tasks:
(1)
The removal of the relief valve on the truck positioning of the wing landing gear.
(2)
The installation of the relief valve on the truck positioning of the wing landing gear.
B.
The relief valve on the truck positioning actuator of the wing landing gear is installed on the side of the actuator. It can be removed and installed with the actuator installed in the airplane.
TASK 32-11-29-004-001
2. The Relief Valve Removal on the Truck Positioning Actuator of the Wing______________________________________________________________________ Landing Gear (Fig. 401)____________
A. References
(1)
09-11-00/201, Towing
(2)
29-11-00/201, Main Hydraulic Supply System
(3)
32-00-30/201, Landing Gear Door Locks
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 起落架 LANDING GEAR 2(63)
