747-400 AMM 飞机维护手册 起落架 LANDING GEAR 2(112)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (1) Install the ground locks in all landing gear (Ref 09-11-00/201).
 S 494-015
 WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (2) Do this task: "Installation of the Door Locks on the Wing Landing Gear" (Ref 32-00-30/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-12-07
 ALL  ú ú 01 Page 401 ú Oct 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

SEE  B 
FWD  SEE  C 
WING GEAR SHOCK STRUT OUTBOARD DOOR 
WING GEAR SHOCK STRUT INBOARD DOOR WING GEAR SHOCK STRUT DOOR FAIRING  SEE  A 

WING GEAR SHOCK STRUT
LINKAGE
ROD

NUT
FWD
A
WING GEAR SHOCK
STRUT OUTBOARD
DOOR
Wing Gear Shock Strut Outboard Door Installation
Figure 401 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-12-07
 ALL  ú ú 01 Page 402 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

BUSHING  SUPPORT FORWARD HINGE 
JUMPER BONDING 
OUTBOARD DOOR WING GEAR SHOCK STRUT 
FWD 
B 
SUPPORT HINGE AFT 
JUMPER BONDING  BUSHING 
(FLANGED) BUSHING 
FWD  OUTBOARD DOOR WING GEAR SHOCK STRUT
C 
Figure 401 (Sheet 2) Wing Gear Shock Strut Outboard Door Installation 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-12-07
 ALL  ú ú 01 Page 403 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 484-018
 (3)  
Do this task: "Installation of the Door Locks on the Body Landing Gear" (Ref 32-00-30/201).

 S 014-004

 (4)  
Remove the inboard door of the shock strut on the wing landing gear (Ref 32-12-06/401).

 NOTE: Disconnect the bonding jumper from the outboard door
____ before you remove the inboard door. Do not remove the fairing from the inboard door.
 D. Procedure
 S 024-005
 (1)  
Remove the outboard door of the shock strut.

 (a)  
Disconnect the linkage rod from the outboard door.

 (b)  
Disconnect the bonding jumper from the outboard door hinges.

 (c)  
Hold the outboard door.

 (d)  
Remove the hinge bolts.

 (e)  
Remove the outboard door from the shock strut.

 TASK 32-12-07-404-006
 3. Wing Landing Gear Shock Strut Outboard Door Installation (Fig. 401)
________________________________________________________
 A. References
 (1)  
32-12-00/501, Wing Gear Doors

 (2)  
32-12-06/401, Wing Gear Shock Strut Inboard Door

 (3)  
32-12-07/601, Wing Gear Shock Strut Outboard Door

 (4)  
IPC 32-12-05 Fig. 1, 32-12-06, 32-12-07

 B.
Access

 (1)  
Location Zone
 734 Wing Landing Gear Door, LH
 744 Wing Landing Gear Door, RH

 C.
Prepare for the Procedure

 S 224-008
 (1)  Examine the outboard door hinges and the attach points of the actuator rod for wear limits (Ref 32-12-07/601).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-12-07
 ALL  ú ú 01 Page 404 ú Oct 10/95
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 起落架 LANDING GEAR 2(112)