• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-12 10:27来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (1)  Pressurize the hydraulic system No. 1 (AMM 29-11-00/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-22-05
 ALL  ú ú 01 Page 408 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
 (2)  S 844-037Put the handle in the "Doors Close" position.
 (3)  S 844-036Put the handle back to the "Stowed" position before the flight.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-22-05
 ALL  ú ú 01 Page 409 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 NOSE WHEEL WELL FORWARD DOOR BELLCRANK - INSPECTION/CHECK
_________________________________________________________
 1.  General_______
 A.  This procedure has illustrations and the worn area charts. There is no procedure in this section to tell you how to get access for the inspection. But, the applicable sections are identified.
 TASK 32-22-05-206-001
 2.  Nose Wheel Well Forward Door Bellcrank Examination (Fig. 601)__________________________________________________
 A.  References
 (1)  
20-11-01/401, Bearings and Bushings

 (2)  
32-22-05/401, Nose Wheel Well Forward Door Bellcrank

 (3)  
IPC 32-22-05 Fig. 1

 B.  
Access

 (1)  
Location Zone
 711 Nose Landing Gear Door, Forward, LH
 712 Nose Landing Gear Door, Forward, RH


 C.  
Procedure


 S 026-002
 (1)  
Remove the forward door bellcrank for the nose landing gear (Ref 32-22-05/401 and 20-11-01/401 are necessay to remove the bearings and the bushings).

 S 226-003

 (2)  
Examine the worn limits of the forward door bellcrank.

 (a)  
Measure the parts if it is necessary and compare the measured dimensions to the limit dimensions on the table (Fig. 601).

 (b)  
If a part is not in the tolerance, repair or replace it when it is necessary.

 (3)  
Install the forward door bellcrank (Ref 32-22-05/401).


 S 426-004
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-22-05
 ALL  ú ú 01 Page 601 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

SEE A
FWD
FORWARD DOOR ACTUATOR
SEE D
BELLCRANK
SEE B
SEE C
BELLCRANK SUPPORT FITTING
OPERATOR ROD
SHOWN WITH DOORS OPEN
A
Wear Limits of the Forward Door Bellcrank for the Nose Wheel WellFigure 601 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-22-05
 ALL  ú ú 01 Page 602 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

1.
NUT
BELLCRANK
9. BEARING/BOLT 8. BUSHING/BUSHING DOOR ACTUATOR (2 LOCATIONS) (2 LOCATIONS)

11. BUSHING/BUSHING
10. BUSHING/BOLT

BELLCRANK


Wear Limits of the Forward Door Bellcrank for the Nose Wheel Well
Figure 601 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-22-05
 ALL  ú ú 01 Page 603 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 起落架 LANDING GEAR 4(12)