• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-02 23:33来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

Localizer Antenna Installation
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-31-31

 ALL  ú ú 01 Page 404 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 NAVIGATION UNIT - REMOVAL/INSTALLATION
______________________________________
 1.  General
_______
 A.  This subject has two tasks. The first task is the removal of the navigation unit. The second task is the installation of the navigation unit and a test of the navigation unit.
 TASK 34-31-41-004-033
 2.  Navigation Unit Removal
_______________________
 A.  General
 (1)  The navigation units are installed in the electronics equipment rack. The No. 1 navigation unit (M154) and the No. 2 navigation unit (M155) are on shelf 4 of the E3 rack.
 B.  References
 (1)  AMM 20-10-07/201, E/E Rack-Mounted Components
 C.  Access
 (1)  
Location Zone
 205 Electronic Compartment


 (2)  
Access Panels
 1201L Electronic Equipment Access Door

 

 D.  Procedure
 S 864-062
 (1)  For the No. 1 navigation unit, open these circuit breakers and attach DO-NOT-CLOSE tags:
 (a)  P18 Load Control Center - Left
 1) VOR/LOC-1
 2) GS-1
 3) INSTR XFMR-1

 S 864-063
 (2)  For the No. 2 navigation unit, open these circuit breakers and attach DO-NOT-CLOSE tags:
 (a)  P6 Load Control Center - Right
 1) VOR/LOC-2
 2) GS-2
 3) INSTR XFMR-2

 S 024-036
 CAUTION: DO NOT TOUCH THE CONNECTOR PINS OR OTHER CONDUCTORS ON THE
_______ NAVIGATION UNIT. IF YOU TOUCH THESE CONDUCTORS, ELECTROSTATIC DISCHARGE FROM YOUR BODY CAN CAUSE DAMAGE TO THE NAVIGATION UNIT.
 (3)  Do this task to remove the applicable navigation unit: Remove the Rack-Mounted E/E Box (Ref 20-10-07/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITHOUT EFIS ú

 34-31-41
 ú ú 03 Page 401 ú Nov 12/99

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 S 034-038
 (4)  Install dust caps on the electrical connectors.
 TASK 34-31-41-404-039
 3. Navigation Unit Installation
____________________________
 A. General
 (1)  The navigation units are installed in the electronics equipment rack. The No. 1 navigation unit (M154) and the No. 2 navigation unit (M155) are on shelf 4 of the E3 rack.
 B. References
 (1)  
AMM 20-10-07/201, E/E Rack-Mounted Components

 (2)  
AMM 23-51-00/501, Flight Interphone System

 (3)  
AMM 24-22-00/201, Manual Control


 C. Access
 (1)  
Location Zone
 205 Electronic Compartment


 (2)  
Access Panels
 1201L Electronic Equipment Access Door

 

 D. Procedure
 S 864-065
 (1)  For the No. 1 navigation unit, open these circuit breakers and attach DO-NOT-CLOSE tags:
 (a)  P18 Load Control Center - Left
 1) VOR/LOC-1
 2) GS-1
 3) INSTR XFMR-1

 S 864-066
 (2)  For the No. 2 navigation unit, open these circuit breakers and attach DO-NOT-CLOSE tags:
 (a)  P6 Load Control Center - Right
 1) VOR/LOC-2
 2) GS-2
 3) INSTR XFMR-2

 S 434-043
 CAUTION: DO NOT TOUCH THE CONNECTOR PINS OR OTHER CONDUCTORS ON THE
_______ NAVIGATION UNIT. IF YOU TOUCH THESE CONDUCTORS, ELECTROSTATIC DISCHARGE FROM YOUR BODY CAN CAUSE DAMAGE TO THE NAVIGATION UNIT.
 (3)  Remove the dust caps from the electrical connectors.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITHOUT EFIS ú
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 导航 NAVIGATION 3(20)