• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-14 10:00来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 49-13-01
 ALL  ú ú 01 Page 605 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 B.  Access
 (1)  
Location Zone 317 APU Compartment-Upper Forward Side of Load Gearbox and Aft Side of APU Firewall, LH

 318  APU Compartment-Upper Forward Side of Load Gearbox and Aft Side of APU Firewall, RH

 (2)  
Access Panel
 317AL APU Access Door
 318AR APU Access Door


 C.  
Prepare to Examine the APU Forward Supports and the Shockmounts


 S 016-021
 (1)  
Open the APU access doors.

 (a)  
Open the latches on the APU access doors.

 (b)  
Open the APU access doors.

 (c)  
Engage the support rods for the APU access doors.

 D.  
Examine the Forward Supports and the Shockmounts for Wear


 S 036-016
 (1)  Remove the vertical support rods, the axial support rods, the lateral support rod, and the related parts (AMM 49-13-01/401).
 NOTE: This procedure examines the bushings and the bolts that
____ connect the support rods to the shockmounts and the firewall brackets. It is not possible to fully examine these parts when they are installed.
 S 216-013
 (2)  
Visually examine the support rods for cracks, corrosion, or damage.

 (a)  
Replace all the support rods that have cracks, corrosion, or damage.


 S 226-017
 (3)  
Do a check of the bushings and the bolts between the support rods and the shockmounts (Fig. 601).

 (a)  
Remove the bushings from the shockmount end of the support rods.

 (b)  
Remove the bushings from the shockmounts.

 (c)  
Examine the bolts and the bushings for wear.

 1)  Replace all the parts that have more than the permitted quantity of wear shown in the table.

 (d)  
Install the bushings in the support rods and the shockmounts.


 S 226-018
 (4)  
Do a check of the bushings and the bolts between the support rods and the firewall brackets (Fig. 601).

 (a)  
Remove the bushings from the firewall end of the support rods.

 (b)  
Remove the bushings from the firewall brackets.


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-13-01
 ALL  ú ú 01 Page 606 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (c)  
Examine the bolts and the bushings for wear.

 1)  Replace all the parts that have more than the permitted quantity of wear shown in the table.

 (d)  
Install the bushings in the support rods and the firewall brackets.


 S 436-020
 (5)  
Install the vertical support rods, the axial support rods, the lateral support rod, and the related parts (AMM 49-13-01/401).

 E.  
Put the Airplane Back to Its Usual Condition


 S 416-022
 (1)  
Close the APU access doors.

 (a)  
Do a visual check of the EGT bus bars: 1) Make sure the bus bars are not damaged. 2) Make sure no metal parts touch the bus bars. 3) Make sure the bus bars do not touch each other.

 (b)  
Disengage the support rods for the APU access doors.

 (c)  
Put the support rods in the clips on the inner side of the APU access doors.

 (d)  
Make sure the insulation covers attach correctly to the APU compartment firewall.

 (e)  
Close the APU access doors.

 (f)  
Close the latches on the APU access doors.


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-13-01
 ALL  ú ú 01 Page 607 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 VERTICAL SUPPORT TUBE - REMOVAL/INSTALLATION
____________________________________________
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 机载辅助动力 1(69)