747-400 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 7(63)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 4)  Make sure the seal depression between the adjacent flaps and between the flaps and wing structure is not out of tolerance (Sections D-D, E-E, F-F and G-G).
 (b)  Do these checks with the LE flaps extended pneumatically: 1) Make sure adjacent flaps are approximately aligned. 2) Make sure the flap seal and the folding fairing seal touch
 each other.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-81-00
 ALL  ú ú 05 Page 516 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 3)  Make sure the dimension X on the midboard and the outboard flap linkage is not larger than the given values (Sections B-B and C-C).
 NOTE: If the rigging tool is not available, measure the
____ dimension Y on the linkage. The dimension Y is equal to the dimension X minus 0.09 inch.
 ~....................................................... | | DIMENSION X | DIMENSION Y | ......................................................... | FLAP NO. | (| 0.03 Inch) | (| 0.03 Inch) | | 1E AND 26E | 30.89 | 30.80 | | (OUTBD LINKS) | | | ......................................................... | 1E AND 26E | 30.87 | 30.78 | | (INBD LINKS) | | | ......................................................... | 1 AND 26 | 30.87 | 30.78 | ......................................................... | 2, 3, 24, 25 | 30.88 | 30.79 | ......................................................... | 4, 5, 22, 23 | 30.89 | 30.80 | ......................................................... | 6 AND 21 | 35.71 | 35.62 | ......................................................... | 7 AND 20 | 35.71 | 35.62 | | (OUTBD LINKS) | | | ......................................................... | 7 AND 20 | 35.73 | 35.64 | | (INBD LINKS) | | | ......................................................... | 8 AND 19 | 35.73 | 35.64 | ......................................................... | 9 AND 18 | 35.76 | 35.67 | | (OUTBD LINKS) | | | ......................................................... | 9 AND 18 | 35.79 | 35.70 | | (INBD LINKS) | | | ......................................................... | 10 AND 17 | 35.82 | 35.73 | | (OUTBD LINKS) | | | ......................................................... | 10 AND 17 | 35.88 | 35.79 | | (INBD LINKS) | | | 2...............…...................…...................1
 (c)  If it is necessary to adjust the variable camber LE flaps, refer to paragraph E.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-81-00
 ALL  ú ú 01 Page 517 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (3)  
The Krueger LE flaps are correctly adjusted if these conditions are satisfactory (Fig. 502):

 (a)
Do these checks with the LE flaps retracted pneumatically:

 1)  Make sure the difference between adjacent flaps and between TE and LE flaps and wing structure are not out of tolerance (Details A and B and Sections B-B and C-C).
 2)  Make sure the distance between the adjacent flaps is not out tolerance (Section B-B).
 3)  Make sure the distance between the flap inboard edge and the wing structure is not out of tolerance (Section C-C).
 4)  Make sure the distances between the LE flap panels and the wing structure are not out tolerance (Detail A).
 5)  Make sure the distance between flaps No. 11 and 16 seal and nacelle structure is not out tolerance (Section A-A).
 6)  Make sure the distance between the retract stop on the actuator arm and the structure is not out tolerance (Section D-D).
 7)  Make sure the contour of the TE flap measured in line with the linkages is not out tolerance (Detail C).
 (b)  
If it is necessary to adjust the krueger LE flaps, refer to paragraph F.

 B.  
Special Tools and Equipment

 (1)  
6TE65B00114 Variable Camber Flap Rigging Bar

 (2)  
G27013-9 Inboard Krueger Flap No. 11 thru 16 Rigging Set
 (Recommended)

 (3)  
12MIT65B04017 Krueger Flap Rigging Tool (Optional)

 (4)  
17MIT65B04017 Leading Edge Flap Drive Unit Lock

 C.  
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 7(63)