(b)
Set the Control Cabin Temperature Selector Switch (CONTROL SWITCH) on the P5-17 Panel to the Manual WARM position. 1) Make sure the Control Cabin Air Mix Valve Position
Indicator (CONTROL IND) moves to the full-HOT position.
(c)
Set the CONTROL SWITCH to the Manual COOL position. 1) Make sure the CONTROL IND moves to the full-COOL position.
(d)
Set the CONTROL SWITCH to the Manual WARM position. 1) Make sure the CONTROL IND moves to the full-HOT position.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-51-06
ALL ú ú 02 Page 503 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 715-008
(3) Do a test of the pasenger cabin mix valve relays:
(a)
Set the R PACK switch on the P5-10 Panel to the AUTO position.
(b)
Set the Passenger Cabin Temp Selector switch (PASSENGER SWITCH) on the P5-17 Panel to the Manual WARM position. 1) Make sure the Passenger Cabin Air Mix Valve Position
Indicator (PASSENGER IND) moves to the full-HOT position.
(c)
Set the PASSENGER SWITCH to the Manual COOL position.
1) Make sure the PASSENGER IND moves to the full-COOL position.
(d)
Set the PASSENGER SWITCH to the Manual WARM position. 1) Make sure the PASSENGER IND moves to the full-HOT position.
S 715-009
(4) Do a test of the M1148 cabin air recirculation fan relays:
(a)
Set the BLEED 1 switch on the P5-10 Air Conditioning Panel to ON.
(b)
Make sure the M1148 Cabin Air Recirculation Fan (RECIRC FAN) is ON.
(c)
Set the L PACK switch to the OFF position.
1) Make sure the RECIRC FAN stops.
(d)
Set the L PACK switch to the AUTO position.
1) Make sure the RECIRC FAN operates.
(e)
Set the R PACK switch to the OFF position.
1) Make sure the RECIRC FAN stops.
(f)
Set the L PACK switch to the OFF position.
(g)
Install the D486 electrical connector on the V18 L PACK VALVE. 1) Make sure the CONTROL IND shows full-COLD. 2) Make sure the RECIRC FAN operates.
(h)
Remove the D486 electrical connector from the V18 L PACK VALVE. 1) Make sure the RECIRC FAN stops.
(i)
Install the D490 electrical connector on the V19 R PACK VALVE. 1) Make sure the PASSENGER IND shows full-COLD. 2) Make sure the RECIRC FAN operates.
(j)
Install the D486 electrical connector on the V18 L PACK VAVE.
S 715-010
(5) Do a test of the outflow valve relays:
(a)
Examine these items: 1) Make sure the V48 OUTFLOW VALVE is in the full-open position.
2) Make sure the V49 FORWARD OUTFLOW VALVE is in the full-closed position.
(b)
Set the RECIRC FAN switch to the OFF position.
1) Make sure the V49 FORWARD OUTFLOW VALVE moves to the full-open position.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-51-06
ALL ú ú 02 Page 504 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(c)
Use the toggle switch on the P5-6 Pressurization Control Module to set the V48 OUTFLOW VALVE to the full-closed position. 1) Make sure the V49 FORWARD OUTFLOW VALVE moves to the
full-closed positon as the V48 OUTFLOW VALVE positions to the full-closed position.
(d)
Use the toggle switch to manually set the V48 OUTFLOW VALVE to the full-open position. 1) Make sure the V49 FORWARD OUTFLOW VALVE moves to the
full-open position.
S 715-011
(6) Do a test of the left pack flow mode relays:
(a)
Set the engine BLEED 1 switch to the ON position.
(b)
Set the flaps to the FLAPS POS 1 position.
(c)
Remove the D962 electrical connector from the V18 L PACK VALVE.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 空调 AIR CONDITIONING 2(9)
