(a)
Remove and discard the cotter pin.
(b)
Remove the nut and washer.
(c)
Remove the bolt to release the clevis end from the reverser arm.
S 864-004-C00
(3)
Move the cable inner member to the fully retracted position at the reverser arm end.
S 034-005-C00
(4)
If the feedback cable is to be replaced, remove the clevis end and the jamnut, and keep them for the installation.
S 034-006-C00
(5)
Loosen the nose cap and carefully move the conduit cap free from the slotted bracket.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-32-05
ALL ú ú C02 Page 401 ú Jul 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SEE B
SEE C
SEE A SEE F
SEED SEEE
A
SEE I
SEE G
JAMNUT
NOSE CAP MEC NOSE CAP
FLAT SLOTTEDWASHER BRACKET
CONDUIT CAP SLOTTED
SEE H LOOP CLAMPS BRACKET
CONDUIT CAP
LOOP
CLAMPS
S-M56-MM-1014-(1)-01-B(M)
RUBBER PACKING BLOCK S-M56-MM-1012-(1)-01-B
C
JUNCTION
PLATE
B
Variable Bleed Valve (VBV) Feedback Cable Installation Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-32-05
ALL ú ú C01 Page 402 ú Feb 25/86
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
APPLY THESCREW
SEALANT HERE HERE
RING SEALANT
HERE
Variable Bleed Valve (VBV) Feedback Cable Installation
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-32-05
ALL ú ú C01 Page 403 ú Jul 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
REVERSER ARM
S-M56-MM-1014-(1)-01-B
Variable Bleed Valve (VBV) Feedback Cable Installation
Figure 401 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
75-32-05
ALL ú ú C01 Page 404 ú Mar 15/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 034-007-C00
(6) Disengage the cable from the loop clamps at the 6:30 and 7 o'clock positions on the mid shroud of the fan frame.
S 034-008-C00
CAUTION: DO NOT CAUSE DAMAGE TO, OR REMOVE THE SEAL AT THE TOP AND LOWER
_______ SURFACES OF THE STRUT FAIRING.
(7)
Remove the 15 screws that attach each half of the strut fairing at the 6 o'clock position.
S 034-009-C00
(8)
Remove each strut fairing half.
S 034-010-C00
(9)
Remove the nuts and bolts that attach the cable flange to the junction plate at the six o'clock position.
S 034-011-C00
(10)
Remove the nut and bolt that attach the loop clamp to the bracket at the six o'clock strut.
S 034-012-C00
(11)
Remove the cable from the rubber packing block found at the 6:30 o'clock position.
S 034-013-C00
(12)
Remove the nuts and bolts that attach the loop clamps to the brackets.
NOTE: The brackets are found at the 6:30 and 7 o'clock positions on
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 空气 AIR(109)
