C. Access
(1)
Location Zone
402 Right Wing Outboard Leading Edge
(2)
Access Panels
6537 Slat Access Panel
6540 Refueling Station Access Door
D. Procedure
S 164-019
(1) Clean these surfaces with the solvent and dry them with a lintfree cloth.
(a)
All of the machined surfaces on the fueling receptacle manifold
(b)
The O-ring grooves of the check valves
(c)
The O-ring grooves of the elbow assemblies.
S 434-020
(2) Install new O-rings, lightly lubricated with fuel, on the check valves and the elbow assemblies.
S 424-021
CAUTION: DO NOT LOOSEN THE O-RINGS OR PUSH THEM OUT OF THEIR CORRECT
_______ SHAPE WHEN YOU INSTALL THE MANIFOLD. A FUEL LEAK CAN EASILY OCCUR.
(3) Install the fueling receptacle manifold.
(a) Put the manifold in its correct position between the support members for the leading edge.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-21-21
ALL ú ú 01 Page 404 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(b) Engage the support bolts with your fingers.
NOTE: Do not install washers on the support bolts at this
____
time.
S 434-022
(4) Engage the bolts that attach the manifold to the check valves and the elbow assembly.
(a) Tighten all of the bolts equally.
S 434-023
(5) Remove the support bolts and install them again with the plain washers and the shim washers.
NOTE: Use the shim washers to make a good fit between the
____ manifold and the support members for the leading edge when you tighten the bolts.
S 414-024
(6)
Install the fueling shutoff valves (AMM 28-21-51/401).
S 414-025
(7)
Install the fueling receptacle if you removed it (AMM 28-21-11/401).
S 434-026
(8)
Connect the bonding jumper on the aft inboard side of the manifold to the airplane structure.
S 434-027
(9)
Connect the bonding jumpers to the fueling shutoff valves and the manifold.
S 764-029
(10)
Do a check of the electrical bond between the manifold and the airplane structure (SWPM 20-20-00).
(a) The resistance must not be more than 0.001 ohm.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-21-21
ALL ú ú 01 Page 405 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 434-030
(11)
Connect the electrical plug to the fueling shutoff valves.
S 414-031
(12)
Install the refuel instrument panel.
(a)
Put the refuel instrument panel in its correct position between the support members for the leading edge.
(b)
Put the screws in the refuel instrument panel.
S 414-032
(13)
Install the refuel quantity indicators in the refuel instrument panel.
S 414-033
(14)
Install the access panel, No. 6537.
S 434-034
(15)
Install the pins and the washers that attach the linkages to the access door.
S 864-036
(16)
Remove DO-NOT-CLOSE tags and close these circuit breakers:
(a) P6 Main Power Distribution Panel
1) EP GND FUELING (for the refuel shutoff valves)
2) QTY (for the fuel quantity indicators)
(17)
Close the access door (6540) for the refuel station (the P15 panel).
S 414-035
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 燃油 FUEL 2(41)
