• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-02 05:51来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 S 414-026
 (1)  
Install the floor panels (Ref 53-21-00/401).

 S 414-050

 (2)  
Install the aisle carpets (Ref 25-27-15/401).

 S 864-027

 (3)  
Remove the electrical power if it is not necessary for other tasks (Ref 24-22-00/201).

 S 414-051

 (4)  
Close the access door, 3701, for the stabilizer trim (Ref 12-31-00/201) if you did not close it before this step.


 TASK 28-22-36-004-028
 4. Aft APU Fuel-Feed Line Shroud Removal
_____________________________________
 A. References
 (1)  
12-31-00/201, Access Doors and Panels

 (2)  
24-22-00/201, Manual Control


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-36
 ALL  ú ú 03 Page 410 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 B. Access
 (1)  
Location Zones
 218 Aft Cargo Compartment
 220 Aft Cargo Compartment Equipment Bay


 (2)  
Access Panels
 3701 Stabilizer Trim Access Door
 3804 APU Cowl Door

 

 C. Procedure
 S 864-029
 (1)
Remove the electrical power from the airplane (Ref 24-22-00/201).

 S 014-030

 (2)  
Open the access door, 3804, for the APU compartment
 (Ref 12-31-00/201).

 

 S 024-031
 WARNING: DO NOT CONNECT THE ELECTRICAL POWER TO THE AIRPLANE WHEN THE
_______ FUEL LINES ARE DISCONNECTED. CAREFULLY DO ALL OF THE SAFETY PRECAUTIONS FOR PROCEDURES WITH OPEN FUEL TANKS. AN EXPLOSION AND BAD INJURIES TO PERSONS CAN OCCUR.
 (3)  Do these steps to disconnect the APU fuel-feed line:
 (a)  
Loosen the hose clamp.

 (b)  
Move the flexible shroud from the part of the APU shroud to get access to the flexible fuel line coupling.

 (c)  
Disconnect the APU fuel-feed line.


 S 024-055
 (4)  Remove the shroud for the APU fuel line.
 (a)  
Disconnect the fuel line coupling from the fuel filter installation (View F, Fig. 401).

 (b)  
Remove the bolt that attaches the bonding jumper to the shroud for the APU fuel line.

 (c)  
Remove the bolts that attach the shroud support clamp to the APU compartment.

 (d)  
Remove the bolts that attach the shroud to the shroud fuel adapter (View F, Fig. 401).

 (e)  
Turn the APU fuel-feed line and the shroud while you remove the fuel line from the APU shroud.

 (f)  
Move the shroud and the seal gaskets off the fuel line.


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-22-36
 ALL  ú ú 01 Page 411 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 024-032
 (5)  Remove "section 2" of the aft shroud.
 (a)  
Get access to the aft shroud (View D, Fig. 401) in the tail cone through the access door, 3701, for the stabilizer trim (Ref 12-31-00/201).

 (b)  
Loosen the hose clamp that attaches the flexible shroud to "section 2" of the aft shroud.

 (c)  
Move the flexible shroud in the forward direction to get access to the fuel line.

 (d)  
Move the aft part of the flexible fuel line from the aft shroud while you lower the fuel line through the access door opening.

 (e)  
Remove the bolt that attaches the bonding jumper to the aft shroud.

 (f)  
Remove the bolts that attach the support clamps for the aft shroud (two locations).

 (g)  
Get access to the aft shroud in the APU compartment (View A, Fig. 401).

 (h)  
Remove the bolts that attach the support clamp for the aft shroud.

 (i)  
Pull the aft shroud through the APU compartment to remove it.


 S 024-033
 (6)  Remove "section 1" of the aft shroud.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 燃油 FUEL 2(134)