曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
27-51-00-860-803 Extend the Trailing Edge Flaps (P/B 201)
27-51-00-980-801 Trailing Edge Flap System Manual Operation (P/B 201)
27-51-28-000-804 Outboard Flap Inboard Support Aft Fairing Removal (P/B 401)
C. Location Zones
Zone Area
543 Left Wing - Fairing Flap Support No. 2
567 Left Wing - Outboard Flap
643 Right Wing - Fairing Flap Support No. 7
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-41
Page 412
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(Continued)
Zone Area
667 Right Wing - Outboard Flap
D. Prepare for the Removal
SUBTASK 27-51-41-860-006
(1) Extend the trailing edge flaps to the 40-unit position. To extend them, do this task: Extend the
Trailing Edge Flaps, TASK 27-51-00-860-803.
SUBTASK 27-51-41-040-002
(2) Do this task: Trailing Edge Flap System Deactivation, TASK 27-51-00-040-801.
SUBTASK 27-51-41-010-002
(3) Do this task: Outboard Flap Inboard Support Aft Fairing Removal, TASK 27-51-28-000-804.
E. Outboard Flap Inboard Transmission Removal
SUBTASK 27-51-41-980-002
(1) Manually extend the trailing edge flaps to the downstop on the ballscrew. To extend them, do
this task: Trailing Edge Flap System Manual Operation, TASK 27-51-00-980-801.
SUBTASK 27-51-41-020-007
(2) Disconnect the torque tubes [68] from the transmission assembly [64]:
(a) Remove the screws [70] that attach the coupling sleeves [67] to the splined couplings [69]
on the torque tubes [68].
(b) Move the coupling sleeves [67] off the splined couplings [69].
SUBTASK 27-51-41-020-008
(3) Disconnect the aft flap drive rod [66] from the drive rod attach fitting [96]:
(a) Remove the nut [94], washer [93], washer [91], bolt [90] and bushing [92] that attach the
drive rod [66] to the attach fitting [96].
(b) Move the drive rod [66] away from the attach fitting [96].
SUBTASK 27-51-41-020-009
CAUTION: MAKE SURE YOU HOLD THE BALLSCREW WHILE YOU DISCONNECT IT. IF YOU LET
THE U-JOINT HOLD THE BALLSCREW, YOU WILL CAUSE DAMAGE TO THE U-JOINT.
(4) Disconnect the ballscrew assembly [62] with the gimbal [72] from the carriage [61]:
NOTE: When you disconnect the ballscrew assembly [62] from the carriage [61], the outboard
flap can move a small distance to the downstop on the flap track.
(a) Remove the nut [74], washer [75] and bolt [76] from the carriage [61].
(b) Remove the inboard carriage bushing [79] and outboard carriage bushing [73] from the
gimbal [72] and the carriage [61].
(c) Move the ballscrew assembly [62] and gimbal away from the carriage [61].
SUBTASK 27-51-41-020-010
(5) Disconnect the ballscrew assembly [62] from the yoke [65] on the transmission assembly [64]:
(a) Remove the nuts [83], washers [82], washers [81] and bolts [80] that attach the ballscrew
assembly [62] to the yoke [65].
(b) Remove the ballscrew assembly [62] from the yoke [65].
NOTE: You can turn the ballscrew assembly [62] and the gimbal [72] to get access to
remove the ballscrew assembly [62].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-41
Page 413
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(c) Remove the ballscrew assembly [62] with the gimbal [72].
SUBTASK 27-51-41-020-011
(6) Remove the transmission assembly [64]:
NOTE: The transmission assembly [64] weighs approximately 50 pounds (23 kilograms).
(a) Support the transmission assembly [64] while you disconnect it from the transmission
attach fitting [63].
(b) Remove the nuts [89] and washers [88] that attach the transmission assembly [64] to the
transmission attach fitting [63].
(c) Remove the upper bolts [86] and washers [87] that attach the wire bracket [85] and the
transmission assembly [64].
(d) Move the wire bracket [85] with the wires away from the transmission assembly [64].
(e) Remove the lower bolt [97] and bolt [98] and washers [87] that attach the drive rod attach
fitting [96] and the transmission assembly [64].
(f) Carefully lower the transmission assembly [64].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-41
Page 414
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Flap Inboard Transmission Installation
Figure 402 (Sheet 1 of 6)/27-51-41-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-41
Page 415
Oct 10/2003
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
737-600-700-800-900 飞机维护手册5 AIRCRAFT MAINTENANCE MANUA(61)
