曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Open this access panel:
Number Name/Location
117A Electronic Equipment Access Door
F. Flap Skew Detection System Functional Test
SUBTASK 27-59-00-860-003
WARNING: KEEP PERSONS AND EQUIPMENT CLEAR OF THE FLIGHT CONTROL SURFACES, THE
THRUST REVERSERS, AND THE LANDING GEAR. THESE COMPONENTS CAN MOVE
SUDDENLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURIES TO
PERSONS AND DAMAGE TO EQUIPMENT.
(1) Use a hydraulic cart , or the EDP to supply system B hydraulic power, do this task: Hydraulic
System A or B Pressurization, TASK 29-11-00-860-801.
NOTE: The EMDP will not supply sufficient hydraulic power for this test.
SUBTASK 27-59-00-860-004
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LE AND TE
FLAPS AND FLAP DRIVE MECHANISMS. THE FLAPS CAN CAUSE INJURIES TO
PERSONS AND DAMAGE TO EQUIPMENT.
(2) Move the flap control lever to the UP position and wait for the flaps to reach the UP position.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-59-00
Page 512
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(a) Make sure the pointers on the flap position indicator are in the UP white band.
SUBTASK 27-59-00-730-001
(3) Do a check of the skew sensor inputs to the FSEU:
(a) Push the ON/OFF button on the front panel of the FSEU to turn on the display.
NOTE: The display will show EXISTING FAULTS?
(b) Push the down arrow until OTHER FUNCTNS? shows on the display.
(c) Push the YES button to select OTHER FUNCTNS? on the FSEU.
(d) Push the down arrow until I/O MONITOR? shows on the display.
(e) Push the YES button to select I/O MONITOR? from the menu.
(f) Push the down arrow until SYNCRO INPUTS? shows on the display.
(g) Push the YES button to select SYNCHRO INPUTS? from the menu.
(h) Make sure the inputs for the skew sensors are in the limits shown in (Table 502) for the UP
position.
NOTE: Push the down arrow key to step through the sensor values.
Table 502/27-59-00-993-804
Display (Sensor)
Skew Sensor Input (Flap Position)
UP 10-Unit 40-Units
F1 SKEW 295.7 to 311.0 95.9 to 113.6 224.4 to 242.1
F2 SKEW 330.5 to 346.0 149.1 to 166.7 279.2 to 296.9
F3 SKEW 0.0 to 13.2 164.7 to 181.5 288.7 to 305.5
F4 SKEW 332.8 to 346.9 121.0 to 138.5 265.1 to 282.1
F5 SKEW 13.1 to 27.2 221.5 to 239.0 77.9 to 94.9
F6 SKEW 346.8 to 360.0 178.5 to 195.3 54.5 to 71.3
F7 SKEW 14.0 to 29.5 193.3 to 210.9 63.1 to 80.8
F8 SKEW 49.0 to 64.3 246.4 to 264.1 117.9 to 135.6
(i) Move the flap control lever to the 10-unit position to extend the flaps.
(j) Make sure the pointers on the flap position indicator are in the 10-unit white band.
(k) Make sure the inputs for the skew sensors are in the limits shown in (Table 502) for the 10-
unit position.
NOTE: Push the down arrow key to step through the sensor values.
(l) Move the flap control lever to the 40-unit position to extend the flaps.
(m) Make sure the pointers on the flap position indicator are in the 40-unit white band.
(n) Make sure the inputs for the skew sensors are in the limits shown in (Table 502) for the 40-
unit position.
NOTE: Push the down arrow key to step through the sensor values.
(o) Move the flap control lever to the 1-unit position to retract the flaps.
NOTE: Measure the time it takes for the trailing edge flaps to retract from the 40-unit
position to the 1-unit position. The time should be in the limit of 22-27 seconds.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-59-00
Page 513
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(p) Push the ON/OFF button on the front panel of the FSEU to turn it off.
G. Put the Airplane Back to Its Usual Condition
SUBTASK 27-59-00-860-005
(1) Move the flap control lever to the UP position to retract the flaps.
SUBTASK 27-59-00-410-001
(2) For the main equipment center.
Close this access panel:
Number Name/Location
117A Electronic Equipment Access Door
SUBTASK 27-59-00-860-006
(3) Remove system B hydraulic power, do this task: Hydraulic System A or B Power Removal,
TASK 29-11-00-860-805.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-59-00
Page 514
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Trailing Edge Flap Skew Detection System Test
Figure 503 (Sheet 1 of 2)/27-59-00-990-803
737-600/700/800/900
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
737-600-700-800-900 飞机维护手册5 AIRCRAFT MAINTENANCE MANUA(128)
