(b)
Make sure 1 shows for bit position 24.
(c)
Set the FMC master switch in the L position.
(d)
Make sure 0 shows for bit position 24.
S 865-181
(12) Prepare the INPUT MONITORING page to monitor E/46/274/00:
NOTE: Label 274 monitors these inputs:
____ -Air/Ground status (1=ground)
-A/T Disconnect (1=disconnect)
-Go Around status (1=G/A)
(a) Push E/46/274/00 on the scratchpad for the center CDU.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-61-00
ALL ú ú 28 Page 531 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(b) Push the necessary LSK to show E/46/274/00 below the PORT LBL SDI indication. 1) Make sure SAMPLE intermittently shows below E/46/274/00.
S 735-182
(13) Do the input check for label 274:
(a)
Open this circuit breaker:
1) P7 Overhead Circuit Breaker Panel a) 7F23 LANDING GEAR DSP & CONT ALTN
(b)
Make sure 0 shows for bit poition 26.
(c)
Close this circuit breaker:
1) P7 Overhead Circuit Breaker Panel a) 7F23 LANDING GEAR DSP & CONT ALTN
(d)
Make sure 1 shows for bit position 26.
(e)
Push and hold the TO/GA switches.
NOTE: The TO/GA switches are on the two inner throttle levers.
____
(f)
Make sure 1 shows for bit position 27.
(g)
Release the TO/GA switches.
(h)
Make sure 0 shows for bit position 27.
(i)
Push and hold the captain's A/T disconnect switch.
NOTE: The captain's A/T disconnect switch is on the left
____
throttle lever.
(j)
Make sure 1 shows for bit position 28.
(k)
Release the captain's A/T disconnect switch.
(l)
Make sure 0 shows for bit position 28.
S 865-183
(14) Prepare the INPUT MONITORING page to monitor E/46/160/00:
NOTE: Label 160 monitors these inputs:
____ -NAV source select switch
-ADC source select switch
-HDG reference select switch (1=NORM, 0=TRUE)
(a) Push E/46/160/00 on the scratchpad for the center CDU.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-61-00
ALL ú ú 27 Page 532 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(b) Push the necessary LSK to show E/46/160/00 below the PORT LBL SDI indication. 1) Make sure SAMPLE intermittently shows below E/46/160/00.
S 735-184
(15) Do the input check for label 160:
(a)
Make sure 0 shows for bit position 24.
(b)
Set the HDG select switch to the TRUE position.
NOTE: The HDG select switch is on the P2 pilot's center
____
instrument panel.
(c)
Make sure 0 shows for bit position 25.
(d)
Set the HDG select switch to the NORM position.
(e)
Make sure 1 shows for bit position 25.
(f)
Set the captain's ADC select switch to the R position.
NOTE: The captain's ADC select switch is on the P1 captain's
____
main instrument panel.
(g)
Make sure 0 shows for bit position 23.
(h)
Set the captain's ADC select switch to the C position.
(i)
Make sure 1 shows for bit position 23.
(j)
Set the captain's ADC select switch to the L position.
(k)
Make sure 1 shows for bit position 23.
(l)
Set the first officer's ADC select switch to the L position.
NOTE: The firt officer's ADC select switch is on the P3 first
____
officer's main instrument panel.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 导航 NAVIGATION 3(181)
