(11)
Make sure that the work area is clean and clear of tool(s) and other
items.
(12)
Remove the warning notice(s).
(13) Remove the stepladder. **ON A/C 106-149, 211-299,
Subtask 25-43-41-410-071-B
A. Close Access
(1)
Install the toilet shroud (Ref. TASK 38-31-41-400-001).
(2)
Install the floor covering (Ref. TASK 25-28-41-400-001) and (Ref. TASK 25-28-42-400-001).
(3)
Install the ceiling panel 251JC (Ref. TASK 25-23-41-400-001).
(4)
Install the ceiling panel 261BC in the aft utility area (Ref. TASK 25-23-42-400-002).
(5)
Install the door-frame lining panels 261DW, 261FW, 261HW (Ref. TASK 25-23-45-400-008).
(6)
Install the lower sidewall panel 251AX (Ref. TASK 25-23-44-400-001).
(7)
Install the upper sidewall panel 251BX (Ref. TASK 25-23-43-400-001).
(8)
Install the cove light panel 251CX (Ref. TASK 25-23-48-400-001).
(9)
Install the overhead stowages where necessary (Ref. TASK 25-24-41-400-001).
(10)
Install the wall-mounted cabin-attendants seat/s. (Ref. TASK 25-22-41-400-001)
(11)
Install the curtains (Ref. TASK 25-26-41-400-003).
(12)
In the AFT cargo compartment, install the partition 161DW (Ref. TASK 25-55-12-400-001).
(13)
Install the sidewall panel 161CW.
(14)
Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
R EFF : 001-049, 051-099, 101-149, 201-299, 25-43-41Page 437 301-399, 401-499, Config-2 Aug 01/05
CES
(15)
Make sure that the work area is clean and clear of tool(s) and other
items.
(16)
Remove the warning notice(s).
(17) Remove the stepladder. **ON A/C 151-199,
Subtask 25-43-41-410-071-A
A. Close Access
(1)
Install the toilet shroud (Ref. TASK 38-31-41-400-001).
(2)
Install the floor covering (Ref. TASK 25-28-41-400-001) and (Ref. TASK 25-28-42-400-001).
(3)
Install the ceiling panel 251JC (Ref. TASK 25-23-41-400-001).
(4)
Install the ceiling panel 261BC in the aft utility area (Ref. TASK 25-23-42-400-002).
(5)
Install the cove light panel 251CX (Ref. TASK 25-23-48-400-001).
(6)
Install the upper sidewall panel 251BX (Ref. TASK 25-23-43-400-001).
(7)
Install the lower sidewall panel 251AX (Ref. TASK 25-23-44-400-001).
(8)
Install the overhead stowage compartments (Ref. TASK 25-24-41-400-001).
(9)
Install the door-frame lining panels 261DW, 261FW, 261HW (Ref. TASK 25-23-45-400-008).
(10)
Install the free-standing cabin-attendant seat (Ref. TASK 25-22-42-400-001).
(11)
Install the doghouse forward of the lavatory D (Ref. TASK 25-27-46-400-001).
(12)
In the AFT cargo compartment, install the partition 161DW (Ref. TASK 25-55-12-400-001).
(13)
Install the sidewall panel 161CW.
EFF : 106-149, 151-199, 211-299, 25-43-41Page 438
Config-2 Aug 01/05
R
CES
(14)
Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(15)
Make sure that the work area is clean and clear of tool(s) and other items.
(16)
Remove the warning notice(s).
(17) Remove the stepladder. R **ON A/C 106-149, 223-299, 301-399, 401-499,
Subtask 25-43-41-390-051
B. Repair of the Water Seal
(Ref. Fig. 409/TASK 25-43-41-991-025)
(1)
Do a visual inspection of the seal (part of the lavatory).
(2)
If necessary remove the damaged seal.
(3)
Clean the component interface and/or the adjacent area.
(4)
Install a new seal.
(a)
Cut the rubber profile to the correct length and attach it with BONDING AND ADHESIVE COMPOUNDS (Material No. 08-066) to the cabin floor.
(b)
Make sure that the seal touches the lavatory and the lower side-wall panel.
(c) If necessary seal gaps with SEALANTS (Material No. 09-036).
**ON A/C ALL
Subtask 25-43-41-862-050
C. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
EFF : ALL 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备3(93)
