(4)
Install the overhead stowage compartments as necessary (Ref. TASK 25-24-41-400-001).
(5)
Install the cove light panel 252FX (Ref. TASK 25-23-48-400-001).
(6)
Install the upper sidewall panel 252BX (Ref. TASK 25-23-43-400-001).
(7)
Install the lower sidewall panel 252AX (Ref. TASK 25-23-44-400-001).
R EFF : 001-049, 051-099, 101-149, 201-299, 25-43-42Page 439 301-399, 401-499, Config-2 Aug 01/05
CES CES
(8) Install the floor covering as necessary (Ref. TASK 25-28-41-400-001) (Ref. TASK 25-28-42-400-001).
(9) In the lavatory, install the emergency oxygen container 34WR (Ref. TASK 35-21-41-400-001).
(10) Install the toilet assembly (Ref. TASK 38-31-41-400-001).
(11) Install the wall-mounted cabin-attendant seat (Ref. TASK 25-22-41-400-001).
(12) Install the cabin attendant swivel-seat (Ref. TASK 25-22-43-400-001).
(13) Install the curtains (Ref. TASK 25-26-41-400-003).
(14) Install the drain line behind the lavatory (Ref. TASK 38-30-00-410-002)
(15) In the AFT cargo compartment, install the partition 162DW.
(16) Install the sidewall panel 162CW.
(17) Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(18) Remove the stepladder.
(19) Remove the warning notices.
(20) Make sure that the work area is clean and clear of tool(s) and other items.
(21) Remove the access platform.
R **ON A/C 151-199,
R Subtask 25-43-42-410-071-A
R A. Close Access
R (1) Install the lower sidewall panel 252AX (Ref. TASK 25-23-44-400-001).
R (2) Install the upper sidewall panel 252BX (Ref. TASK 25-23-43-400-001).
R (3) Install the cove light panel 252FX (Ref. TASK 25-23-48-400-001).
R (4) Install the ceiling panel 262BC in the aft utility area (Ref. TASK
R 25-23-42-400-002).
R (5) Install the ceiling panel 252JC (Ref. TASK 25-23-41-400-001).
R (6) Install the overhead stowage compartments (Ref. TASK 25-24-41-400-
001).
R (7) Install the door frame lining-panels 262DW, 262FW, 262HW (Ref. TASK
R 25-23-45-400-005).
R (8) Install the floor covering (Ref. TASK 25-28-41-400-001) and
R (Ref. TASK 25-28-42-400-001).
R (9) Install the free-standing cabin-attendant seat (Ref. TASK 25-22-42-
400-001).
R (10) Install the doghouse forward of the lavatory E (Ref. TASK 25-27-46-
400-001).
R (11) Install the cabin attendant swivel-seat (Ref. TASK 25-22-43-400-001).
R (12) In the AFT cargo compartment, install the partition 162DW.
R (13) Install the sidewall panel 162CW.
R (14) Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
R (15) Remove the stepladder.
R (16) Remove the warning notices.
R (17) Make sure that the work area is clean and clear of tool(s) and other
items.
R (18) Remove the access platform.
R **ON A/C 106-149, 223-299, 301-399, 401-499,
Subtask 25-43-42-390-051
B. Repair of the Water Seal
(Ref. Fig. 408/TASK 25-43-42-991-021)
(1)
Do a visual inspection of the seal (part of the lavatory).
(2)
If necessary remove the damaged seal.
(3)
Clean the component interface and/or the adjacent area.
(4)
Install a new seal.
(a)
Cut the rubber profile to the correct length and attach it with BONDING AND ADHESIVE COMPOUNDS (Material No. 08-066) to the cabin floor.
(b)
Make sure that the seal touches the lavatory and the lower side-wall panel.
(c) If necessary seal gaps with SEALANTS (Material No. 09-036).
**ON A/C ALL
Subtask 25-43-42-862-051
C. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
EFF : ALL
25-43-42Page 442
Seal
Figure 408/TASK 25-43-42-991-021
CES RAZOR SUPPLY - DESCRIPTION AND OPERATION
________________________________________
1.
General
_______
An electrical razor socket is installed in each lavatory.
2.
Component Location
__________________
**ON A/C 001-049, 051-099, 101-105, 151-152, 201-206,
(Ref. Fig. 001) -------------------------------------------------------------------------------FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA | | | | DOOR | REF.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备3(105)
