(a)
Remove the grip handle (1).
(b)
Adjust the special screws (3).
(c)
Do para B. (2) again.
5. Close-up
________ Subtask 25-45-23-862-050
A. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
EFF : ALL
25-45-23Page 404
DISPENSER - SEAT COVER - REMOVAL/INSTALLATION
_____________________________________________
TASK 25-45-24-000-001 Removal of the Seat Cover Dispenser
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 25-45-24-991-001 Fig. 401
3. Job Set-up
__________ Subtask 25-45-24-861-050
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. TASK 24-42-00-861-001).
4. Procedure
_________ Subtask 25-45-24-020-050
A. Removal of the Seat Cover Dispenser
(Ref. Fig. 401/TASK 25-45-24-991-001)
(1)
Push the seat cover dispenser (1) up and remove the dispenser from the holder (2).
(2)
Remove the screws (3) and the holder (2) from the lavatory wall.
EFF : ALL
25-45-24Page 401
Seat Cover Dispenser
Figure 401/TASK 25-45-24-991-001
EFF : ALL 25-45-24 Page 402
Feb 01/98
CES
TASK 25-45-24-400-001 Installation of the Seat Cover Dispenser
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 25-45-24-991-001 Fig. 401
3. Job Set-up
__________ Subtask 25-45-24-860-050
A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. TASK 24-42-00-861-001).
4. Procedure
_________ Subtask 25-45-24-210-050
A. Preparation for Installation
(1)
Clean the component interface and/or the adjacent area.
(2)
Make sure that the parts retained from the removed component are clean and in the correct condition.
(3)
Do an inspection of the component interface and/or the adjacent area.
EFF : ALL
25-45-24Page 403
Subtask 25-45-24-420-050
B. Installation of the Seat Cover Dispenser
(Ref. Fig. 401/TASK 25-45-24-991-001)
(1)
Put the holder (2) in position on the lavatory wall and install the screws (3).
(2)
Push the seat cover dispenser (1) into the holder (2).
5. Close-up
________ Subtask 25-45-24-862-050
A. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
EFF : ALL
25-45-24Page 404
TABLE - BABY NURSING - REMOVAL/INSTALLATION
___________________________________________
TASK 25-45-25-000-001
Removal of the Baby Nursing Table
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power
**ON A/C 001-049, 051-058, 101-101,
25-45-25-991-001 Fig. 401 R **ON A/C 059-099, 102-149, 151-199, 201-299, 301-399, 401-499,
25-45-25-991-001-A Fig. 401A
**ON A/C ALL
25-45-25-991-002 Fig. 402
3. Job Set-up
__________
Subtask 25-45-25-861-050
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备3(127)
