EFF : ALL
25-54-11Page 402
FWD Cargo Compartment Partition FR24
Figure 401/TASK 25-54-11-991-001
EFF : ALL 25-54-11 Page 403
Nov 01/99
CES
TASK 25-54-11-400-001
Installation of the FWD Cargo-Compartment Partition FR24
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific warning notice
No specific access platform 2.1 m (6 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-011 USA MIL-G-4343 SILICONE GREASE PNEUMATIC SYST AND SEALS (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 25-54-11-991-001 Fig. 401
EFF : ALL
25-54-11Page 404
3. Job Set-up__________
Subtask 25-54-11-860-050
A. Aircraft Maintenance Configuration
(1) Make sure that the FWD cargo-compartment door is open and safetied with the actuator safety locks (Ref. TASK 52-30-00-860-001).
(2) Make sure that the access platform is in position at the opening of the FWD cargo-compartment door.
(3) Make sure that the warning notice is in position on the control panel of the FWD cargo-compartment loading system to tell persons not to use it.
Subtask 25-54-11-865-051
R R R R R R B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------2000VU SEMI AUTO CLS-FWD 2MY 03 B 2000VU SEMI AUTO CLS-FWD 3MY 01 B
4. Procedure_________
(Ref. Fig. 401/TASK 25-54-11-991-001)
Subtask 25-54-11-910-050
A. Preparation for Installation
(1) Do an inspection of the component interface and/or the adjacent area.
(2) If necessary, remove the damaged seal (9) from the partition panels (6), (7), (8).
(3) Clean the component interface and/or the adjacent area with CLEANING AGENTS (Material No. 11-004).
(4) Replace the damaged seal (9) on the partition panels (6), (7), (8).
EFF : ALL
25-54-11Page 405
Subtask 25-54-11-420-050
B. Installation of the FWD Cargo-Compartment Partition FR24
(1)
Apply a thick layer of COMMON GREASE (Material No. 04-011) on the seals around each partition panel.
(2)
Install the partition panels (6), (7), (8).
(3)
Install the cover strip assies (4).
(4)
Install the cover assies (2).
(5)
Attach the partition panels (6), (7), (8) with the studs (1), (3), (5).
