(b)
Rub the stains with a cloth that is moist with acetone, isopropyl alcohol, ethyl alcohol, or Freon TF.
(c)
Remove the solvent with a cotton flannel cloth that is moist with water.
(d)
Rub all of the surface very lightly with a cloth that is moist with water to remove the sharp particles.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-01-12
ALL ú ú 02 Page 708 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(e)
Apply a solution of Orvus WA Paste to the mirror.
(f)
Rub the surface with a clean cloth that is moist with water.
(g)
Apply the solution of Orvus WA Paste one more time.
(h)
Polish the plastic with a cotton flannel cloth that is moist with water.
L. Clean the Fabrics
S 147-018
(1) Clean the carpets, the seat upholstery, and equivalent equipment as follows:
(a) To clean a small area on the surface, do these steps:
NOTE:____Remove stains as soon as possible. It is not possible to remove some materials from the fabric if you do not remove them immediately.
1) To remove tea, coffee, fruit juices, wines, fruit, catsup, soft and mixed drinks, chocolate, syrups, perfumes, vomit, and urine, do these steps: a) Soak the dirty area with cold or lukewarm water.
CAUTION: DO NOT USE TOO MUCH HAND PRESSURE WHEN YOU RUB
_______ THE FABRIC WITH THE BONE SCRAPER. IF YOU USE TOO MUCH HAND PRESSURE, THE BONE SCRAPER CAN CAUSE DAMAGE TO THE FABRICS.
b) Carefully rub the area with a bone scraper to loosen
the unwanted material from the fabric. c) Apply a mixed detergent to the dirty area. d) Rub the area with a bone scraper one more time. e) Use a vacuum cleaner to remove the detergent and the
unwanted materials.
NOTE: Use a soft cloth to remove the remaining
____ moisture if it is necessary.
2) If there is an odor, do these steps: a) Mix one teaspoon of bicarbonate of soda in six ounces
of water. b) Apply the mixture on the area. c) Rub the area with a bone scraper. d) Remove the moisture with a wiper.
3) To remove fresh paints, greases, lipsticks, permanent inks, oils, jet fuel, hydraulic fluid, powdered graphite, and powdered aluminum, do these steps: a) Remove the loose unwanted material as soon as possible
with a wiper. b) Apply a mixed detergent to the area. c) Let is soak for 30 seconds. d) Apply an additional quantity of the mixed detergent to
the area.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-01-12
ALL ú ú 01 Page 709 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
e) Carefully rub the area with the blunt end of the bone scraper to lift the unwanted material into the detergent.
f) Use a vacuum cleaner to remove the detergent and the unwanted material. g) Use a wiper to remove all the remaining moisture if it is necessary. h) If the area is not fully clean, do the above steps again until the area is fully clean. i) Use a soft fiber brush to straighten and lift the fabric pile.
4) To remove adhesives, sealants, paints, asphalt, and gum, do these steps: a) Use a vacuum cleaner to remove all the loose unwanted
material from the fabric.
CAUTION: PUT A COVER ON THE PLASTIC AND PAINTED SURFACES
_______ ADJACENT TO THE DIRTY AREA. CHLORINATED SOLVENTS WILL CAUSE DAMAGE TO THE PLASTIC AND PAINTED PARTS. USE ONLY THE MINIMUM QUANTITY OF CHLORINATED SOLVENTS NECESSARY TO REMOVE THE UNWANTED MATERIAL. CHLORINATED SOLVENTS WILL MOVE THE UNWANTED MATERIALS AND MAKE A NEW STAIN.
b) Use a wash bottle with a nozzle to apply a chlorinated solvent (Inhibisol-Westsafe or Chlorothene NU) to the dirty area. Let the solution soak for 30 seconds.
c) Carefully rub the fabric with a bone scraper to loosen
the unwanted materials.
d) Remove the unwanted materials with wipers.
e) Do the above steps again until the area is fully clean.
f) Immediately after the area looks fully clean, clean the
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(8)
