I. Clean Tedlar-covered Surfaces
S 117-043
(1) To clean the tedlar-covered surface of a part while it is installed in the airplane, do these steps:
(a) Mix one part of Spraywhite E with 5 to 10 parts water (by volume).
CAUTION:_______DO NOT LET ETHYL ALCOHOL TOUCH THE PLASTIC PARTS. ETHYL ALCOHOL CAN CAUSE DAMAGE TO PLASTIC PARTS.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-01-12
ALL ú ú 01 Page 706 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(b) Apply the mixture with a brush that has soft-to-medium bristles. Rub the surface in all directions with the brush.
NOTE: Add up to 30% ethyl alcohol O-E-760 (by volume) to
____
you remove nicotine.
(c)
Remove the detergent with a sponge that is moist with clean water.
(d)
Dry the area with a clean wiper.
S 117-044
(2) To clean the tedlar-covered surface of a part that is out of the airplane, do the steps that follow:
(a)
Repair all the damaged parts (AMM 25-01-12/801).
(b)
You can use the same method to clean the parts you would use if the parts were installed, or you can use the method that follows: 1) Remove or cover with masking tape all the plastic and
painted parts that are not resistant to solvent damage.
NOTE: These solvents will remove the paint from the
____ edge of the part.
WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH OR EYES, OR ON YOUR
_______ SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. PUT ON PROTECTIVE SPLASH GOGGLES AND GLOVES WHEN YOU USE SOLVENTS. KEEP SOLVENTS AWAY FROM SPARKS, FLAME, AND HEAT. SOLVNETS ARE POISONOUS AND FLAMMABLE AND WILL CAUSE INJURY OR DAMAGE.
2) Clean the part with a wiper or cloth and one of these solvents: a) Methyl Ethyl Ketone, (MEK) b) Toluene (TT-T-548) c) A 50%-50% mixture of MEK and toluene d) Ethyl Alcohol e) Perchloroethylene or 1-1-1 trichloroethane
(chlorinated). 3) If you accidentally removed paint from the part when you used the solvent, apply primer and paint to those areas.
NOTE: Refer to the Paint the Airplane Equipment and
____ Furnishings task for the instructions.
J. Clean the Translucent and Transparent Plastic Surfaces
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-01-12
ALL ú ú 03 Page 707 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 117-050
WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR ON YOUR
_______ SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. SOLVENTS MAY BE FLAMMABLE OR HARMFUL TO THE ENVIRONMENT. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
CAUTION:_______DO NOT RUB THE PLASTIC SURFACES WITH A DRY CLOTH. THIS WILL CAUSE SCRATCHES AND AN ELETROSTATIC CHARGE.
REFER TO AMM 12-16-03/301 FOR INSTRUCTIONS TO CLEAN THE WINDOWS.
(1)
Rub the surface lightly with a cloth that is soaked with acetone, isopropyl alcohol, ethyl alcohol, Freon TF or mixed detergent.
S 117-012
(2)
Remove the detergent with a cotton flannel cloth that is moist with water.
S 167-013
(3)
Remove a thin dust layer or electrostatic charge with a cloth that is moist with water.
K. Clean the Mirrors
S 167-014
(1) To clean the glass mirrors, do these steps:
(a)
Use a razor blade to remove dry paint and other unwanted materials that are not easy to rub off.
(b)
Use Glyst Concentrated Glass Cleaner or Glasswax to clean the glass.
NOTE: Obey the manufacturer's CAUTIONS and instructions.
____
S 117-015
CAUTION:_______DO NOT RUB THE PLASTIC SURFACES WITH A DRY CLOTH. THIS WILL CAUSE SCRATCHES AND AN ELECTROSTATIC CHARGE.
(2) To clean the plastic mirrors, do these steps:
(a)
Remove the loose unwanted materials with a clean cloth.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(7)
