(d)
Remove the detergent with a clean wiper that is soaked with water.
(e)
Dry the surface with a clean, dry cloth.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-01-12
ALL ú ú 03 Page 714 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 167-035
(3) To clean stainless steel, do these steps:
(a) Do the procedure given for opaque plastic or painted surfaces to clean the steel; then polish the steel with these steps: 1) Use a wiper to apply polish to a small area.
NOTE: Use Met-All for highly-polished surfaces, and
____ use Brilliant Shine for satin finishes.
2) Rub the area until the polish becomes black. 3) Rub the surface with a clean, dry wiper until the rubbed area looks bright and continuous. 4) Remove the remaining polish with a mixed detergent.
Q. Clean the Air Grille Panels
S 147-036
(1) Use a vacuum cleaner to clean the air grille panels.
TASK 25-01-12-377-002
3. Paint the Airplane Equipment and Furnishings_____________________________________________
A. General
(1)
The procedures that follow are in groups in relation to the type of decorative surface you will paint: Tedlar, polycarbonate (Lexan), ULTEM, and Declar.
(2)
Fully mix the paint before you use it. It is better to use a mechanical mixer. Do not shake the water emulsion paint too much, because air bubbles will occur.
(3)
Mix the paint to the correct consistency before you spray it. Do not mix thinners from different vendors.
(4)
Keep the air clean. Dirt or lint can contaminate the paint before it is dry.
(5)
The color of the new paint must be the same as the old paint or you will see an outline. Use paint with high-grade commercial standards.
B. Consumable Materials
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-01-12
ALL ú ú 03 Page 715 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
WARNING: OBEY THE INSTRUCTIONS FROM INDUSTRIAL HYGIENE, FIRE AND SAFETY
_______ ORGANIZATIONS FOR THE FACILITIES, EQUIPMENT, VENTILATION, AND PROCEDURES NECESSARY FOR SAFE OPERATIONS. THE MATERIALS YOU WILL USE ARE POISONOUS AND FLAMMABLE. IF THE CORRECT PROCEDURES ARE NOT USED, INJURY OR DAMAGE WILL OCCUR.
DO NOT GET THE PAINT MATERIALS IN YOUR MOUTH OR EYES, OR ON YOUR SKIN. DO NOT BREATHE PAINT FUMES. PUT ON PROTECTIVE SPLASH GOGGLES AND GLOVES WHEN YOU USE THESE MATERIALS. KEEP THESE MATERIALS AWAY FROM SPARKS, FLAME, AND HEAT. PAINT MATERIALS ARE POISONOUS AND FLAMMABLE AND WILL CAUSE INJURY OR DAMAGE.
(1)
Miscellaneous Materials
(a)
B00129 Solvent - Isopropyl Alcohol - TT-I-735
(b)
B00148 Solvent - Methyl Ethyl Ketone (MEK), TT-M-261
(c)
C00000 Primer - E61WC40, Polane Primer
(d)
C00039 Primer - BMS 10-83, Type I
(e)
C00040 Paint - Polyurethane, BMS 10-83, Type II
(f)
C02021 Putty - Glazing, dual purpose No. 4
(g)
G00147 Tape - Masking, Permacel No. 718
(h)
G00381 Paper - Abrasive, 180-grit (minimum grit number)
(2)
Detergents
(a)
B00157 Spraywhite E
(b)
B00158 Clean Quick
(c)
B00159 Glo Do-All Formula 3B
(d)
B00161 Orvus WA Paste
(e)
B00294 Glo Do-All Formula 1D
C. Access
(1) Location Zone
200 Upper Half Fuselage
D. Prepare to Paint the Interior Surfaces of the Airplane
S 117-039
(1) Prepare to paint the tedlar surfaces with these steps:
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(11)
